Can you propagate Calathea White Fusion in water?

Can you propagate Calathea White Fusion in water?

Check the first inch of soil for moisture with your finger, but crisping leaves signal that your plant is extremely dry. Because this plant might be sensitive to pollutants in the water, many enthusiasts choose to use collected rainwater or purified water for their Calathea.

Tap water at room temperature, on the other hand, is perfectly good. The one exception is if you want to grow the plant in a hanging basket or container like the ones used for growing orchids. Try to determine which style of plant your Calathea will be after it arrives in the mail.

If you are shipping it as an indoor plant, simply place it outside when the weather is warm enough for it to survive outdoors and store it somewhere safe during cooler months.

Propagating houseplants from cuttings is a significantly cheaper and more convenient alternative to purchasing a new plant. It’s also a great way to propagate the plants you want without disturbing the ones you already have.

How do you grow Calathea White Fusion?

Allow indirect filtered light to shine on your Calathea White Fusion to appreciate it’s amazing coloration. Sunlight is preferred, but indirect light with no direct sun exposure will do if all you have available is low-level, weak sunlight.

You can direct your plant indoors in the winter if it’s just too cold for it to survive outdoors unamend. But when spring and summer come along, place it outdoors as you would any other outdoor flowering plant. In fact, grow it in full sun during all four seasons to appreciate its full beauty.

Only water your plant until the top inch of soil is dry. Too much water will drown it, but too little water will let it wilt and dry out.  The plant is sensitive to air pollutants. Give your plant filtered or purified water.

Place your potted Calathea on a humidity tray or saucer filled with pebbles and barely-simmering water. The purpose of the saucer is to catch any runoff from the tray, so any amount of wetness will do as long as you don’t overwater your plant.

Use soil that is peaty, light, and free-draining. You don’t want to swamp your plant, but you also don’t want it to dry out. Use a specialized type of soil that is specially formulated for plants grown in pots and soilless mixes. If you buy the soil by the bag, just scoop a little out of the bag and pack it around an earthenware pot. Don’t fill the pot too full, or your plant will be soggy from water-logged soil.

How do you revive White Fusion Calathea?

If your Calathea White Fusion appears to be dying, the most likely culprit is a lack of humidity and excessive direct sunlight. In general, you may resuscitate them by cutting the plant to the stems and giving it with a healthy foundation from which to grow.

Additionally, you may choose to rejuvenate the plant by pinching off a couple of the bottom leaves. Calathea White Fusion may be shaded for a few weeks but should be returned to its regular light condition once recovered.

Calathea White Fusion is drought and neglect tolerant, but if you want to maintain your plant healthy, it is critical not to let it go too long between watering. On the other side, avoid overwatering, since this will result in root rot. To avoid overwatering, a good rule of thumb is to keep the soil in your plant’s container gently damp at all times.

Calathea White Fusion is more at ease in diffused light. Because they cannot handle direct sunlight, it is critical to position them in partial shade or even indirect light. They are capable of surviving in the sunlight when they are considerably younger and smaller.

Why my Calathea white fusion leaves turning yellow?

When Calatheas are kept too wet, the leaves yellow and finally turn brown, and the stems may collapse. Water just until the top 1-2 inches of soil is dry before planting in a well-drained container. Allow the plant to absorb the required amount of water and then drain the excess. If the roots stay excessively moist, root rot may emerge.

Water sparingly; the plant will die if it becomes saturated. To ensure proper drainage, wet the whole pot, including the drainage holes and saucer. It is also not suggested to water on a saucer; while watering, ensure that the water drains through the bottom of the pot.

Allowing the soil to become too dry is worse than overwatering, since it results in withering and brown leaf tips. Additionally, the leaves may become yellow and fall off. When watering, it is critical to wet the whole potting mix, not just the top layer.

During the spring and summer, Calathea White Fusion is prone to wilt. This is a normal condition that signals the plant is dehydrated. Allow the soil to dry between watering, but not totally, or the leaves will yellow (and fall off).

Why is my Calathea White Fusion drying?

Calathea White Fusion is a native Brazilian plant. The following factors contribute to a plant’s death:

Excessive light: Calathea White Fusion is a sun-loving plant that thrives in full light. When exposed to direct sunlight for an extended period of time, the leaves become feeble, pale or yellowish in color and burn or become translucent. Additionally, the leaves may develop brown or black patches.

Low humidity: To flourish, Calathea White Fusion requires a particular level of humidity. It is critical to avoid allowing the soil to dry up while watering and to avoid leaving them in drafty regions. When there is insufficient humidity, the leaves may darken, feel stiff or brittle, and eventually fall off the plant.

Overwatering: This is perhaps the most common cause of houseplant death. When watering your plant, ensure that the soil is well saturated and then allow the top inch or so of soil to dry out before watering again.

Submerged: This is probably the most common reason for houseplant death. When watering your plant, make sure to leave some dirt above the root ball in the drainage hole of the container.

Excessive fertilization: Fertilizer is necessary for houseplants. Calathea White Fusion requires a lot of water and fertilizer nutrients and should be fertilized according to the product guidelines.

Low temperature: If exposed to extremely low temperatures, the leaves of Calathea White Fusion will turn pale and yellow (or even brown if the air is too dry) (between 45-50 F.).

Calathea White Fusion requires adequate drainage. If the soil does not drain properly or if the drainage hole becomes clogged, the plant roots will rot and die.

How do you prune Calathea White Fusion?

Simply cut the leaf near the steam using a sharp knife or a pair of scissors and discard the damaged leaf. Then, instead of attempting to rescue dead leaves, your plant should focus its efforts on stimulating new leaf growth. You can help your plant along by pruning out the oldest leaves.

If a leaf does not recover, you may cut it off at the steam or remove the whole leaf. Calathea White Fusion is likely to adjust well to this type of pruning maintenance. Allow the plant to recover before pruning any more.

How do you keep White Fusion alive?

Water the plant gently and moderately from above, allowing water to soak through to the roots, then tip away any excess water. Avoid damp soil at all costs. It should be noted that the White Fusion Calathea is quite sensitive to fluoride in water.

It is also critical to avoid drying out the soil. The soil should be moist at all times, but not soaked. In general, the soil should be damp and allow good airflow through it.

If there are any problems with discolored leaves or wilting, it is essential to determine if this is due to excessive water or too little. On the other hand, if the problem persists and the plant continues to grow and look healthy, it is likely that a simple adjustment in watering (or more often) will solve the problem.

Calathea White Fusion prefers filtered sun or partial shade. The plant can survive when it is considerably younger and smaller. It is ideal to avoid direct sunlight, particularly during the hottest parts of the day (10 to 15 hours). Instead, place your plant in a spot that receives some indirect light. This will allow it to grow more slowly and make it less susceptible to sunburns.

Is Calathea White Fusion an indoor plant?

Calathea species are recognized for their interestingly formed inflorescences in their native habitat; yet, they rarely blossom inside as houseplants. The Calathea White Fusion’s flowers are unusually shaped and white, but it is still a tropical plant. This means that its care requirements ought to be moderately different from that of other houseplants.

Every individual is different, so it is typical for a Calathea White Fusion to adapt to indoor conditions gradually. Some plants may not grow much or at all indoors, while others thrive in their new habitat. As a rule, the more light that your plant receives, the more it will grow.

If your plant is small and young, most of its energy is used to sustain its root system. As it grows older and larger, some of those resources are diverted to flower stems. The plant’s size can be increased by pruning branches.

A partial shade or filtered sunlight is ideal for Calathea White Fusion’s indoor care requirements. Though it is possible for them to grow in direct sunlight, the leaves will turn yellow, turn brown or lose all coloration.

You should place your plant in a spot that receives some indirect light. If you keep your plant in filtered or partial-shade outdoors during the summer, it should do well indoors.

In general, a pot for Calathea White Fusion should be slightly bigger than the pot it comes with to allow for better airflow and drainage.

Does Calathea White have fusion flower?

Calathea ‘White Fusion’ plants are sometimes referred to as peacock plants owing to its stunning foliage. They include variegated colors of marbled green and white leaves with pinkish lilac undersides and stems.

The vertical and curving fronds are edged with short spurs. The smallest variety of this plant is the White Fusion, measuring about 4-8 inches in height and 6-10 inches wide. It has white flowers borne on a stem that reaches about 18 inches high and 6 inches wide.

Flower colors include variegated green, pinkish yellow, orange striped (Fusion Orange) or purple/red-pink (Fusion Burgundy).

The name ‘White Fusion’ refers to these plants’ striking white coloration. They are among the rarest of cultivars and are quite limited in number.

The Calathea ‘White Fusion’ plant is so named because of its dazzling white flowers that appear amid the beautiful green foliage.

How do you take care of Calathea fusion white?

The most critical aspect of caring for your Calathea White Fusion is to be aware of its ever-changing requirements. Calathea White Fusion prefers the following aspects;


Use an African Violet-specific potting mix or make your own using peat moss, perlite, and potting soil for Calathea White Fusion. As with other house plants, the key to providing your Calathea with the right amount of water is to set it in the proper soil mix.

Calathea White Fusion thrives in a commercial African violet soil mix that is sufficiently peaty to retain moisture but entirely draining to avoid the roots being saturated with water and decomposing.


Continue watering White Calathea Fusion until the top 2″ (5cm) of soil is almost completely dry to the touch. Calathea White Fusion requires continually moist soil; however root rot will develop if the soil becomes saturated. Simply stick your finger into the earth to assess whether or not to water your Calathea.

If the top inch of soil is completely dry, it is necessary to fully water. It is vital that any excess water drains out of the pot through the opening at the bottom.


For a Calathea White Fusion, indirect light is perfect. Calatheas are found only in tropical jungles, where they receive light solely via the forest canopy. To imitate this, provide your Calathea White Fusion with filtered intense light. Avoid windows that face south, as they typically receive an excessive quantity of sunlight. Never place the pot directly in the sun.


Calathea White Fusion appreciates the constant warmth of the location. Maintain a temperature range of 65 to 80 degrees Fahrenheit (18 to 27 degrees Celsius). Keep your Calathea away from heat sources, air conditioners, and drafts.


As with sufficient watering, it is vital to maintain a high humidity level to ensure a happy Calathea White Fusion. A humidity level of at least 85% is desirable. Additionally, a humidity level of 60% or above is necessary.

You might want to consider using a humidifier. If you follow these instructions, your plant will be really pleased. You can place the Calathea pot on a tray of moist stones. It may be hung on a bathroom window as long as it is not sprayed with hot water. It will like the moist steam.


Monthly feedings of a balanced liquid house plant fertilizer, such as NPK 10-10-10, diluted in half, will benefit Calathea White Fusion.

Alternatively, organic fertilizer is an option. While there are commercially available things, you may easily construct your own.


Calatheas are slow growers and require repotting just once a year or once every year and a half in most settings. Repot your Calathea White Fusion in a larger container than it is now growing in. Repot your plant in the original container if you prefer that it does not grow too enormous. Replace the soil with new and water your plant carefully.


Pruning Calathea White Fusion involves removing leaves that are damaged, curled, or discolored. Take a sick leaf and separate it from its stem. Do not be alarmed if more than one has to be removed. In their place, new leaves will emerge instantly.


If your Calathea White Fusion grows to a certain size, it will develop clumps on its sides. Individual plants can be separated and transplanted from these clumps. Divide your Calathea into several plants during spring or summer repotting, while it is actively growing.

How often do you water a Calathea White Fusion?

White Stars need continual hydration but should never be kept too wet or too dry. They should be watered once every 1-2 weeks with room temperature tap water that has been distilled or filtered. In between watering, push your finger into the top inch or two of soil; if it is dry, it is time to water; if it is moist, return later.

Watering your Calathea white fusion will take up the most of your attention. Like humidity, the plant may be finicky about moisture. To keep the soil fresh and moist, water it thoroughly. But take careful not to let it grow wet.

When the top 1-2 inches of soil are fully dry, water. Water the plant lightly and moderately from above, allowing the water to sink into the roots and then allowing any excess water to run away. Simply insert your finger into the soil to determine whether or not to water your Calathea.

It is vital to water thoroughly if the top inch of soil is entirely dry. It is critical that any surplus water drains out of the pot through the bottom aperture.

Wait a few days before rechecking if the soil of your Calathea stays damp when touched. With practice, you will develop an uncanny ability to determine the best moment to water your fussy infant. Calathea is very susceptible to fluoride, which is frequently added to public water systems.

Use rain, filtered, or bottled water in your “White Fusion” water to avoid fluoride poisoning. If you’re on a tight budget, fill the bucket halfway with tap water and leave it overnight to allow the gas to escape.

What is Calathea White Fusion?

Calathea White Fusion is a unique and highly sought-after home plant owing to its unusual coloring: huge glossy leaves with white stripes and borders and a delicate purple underside. Unsurprisingly, it is frequently referred to as a ‘peacock plant.’

Calathea White Fusion is a low-maintenance plant that makes an excellent present for anybody, but especially for weddings and housewarming celebrations. Continue reading to learn more about how to keep Calathea White Fusion alive and well.

Calathea White Fusion is a hybrid between Cadet (affectionately known as ‘White Cadet’) and Moonlight. The blooms of this plant are often white with a purple core, indicating that they can withstand direct sunshine, in contrast to the majority of Calatheas, which require shade or indirect light.

Calathea White Fusion is a stem plant with ‘arrowhead’ shaped foliage. The leaves grow from the stem, not from separate plants. They are often kept in pots, but because they may grow rather large in containers, you may find they thrive in larger pots at home and then transplanted to the ground when they reach maturity.

Why is my Calathea white fusion leaves curling?

Curled or patchy leaves suggest an insufficient supply of water to the plant. Browning leaves signal that the plants want additional moisture. Excessive watering or freezing weather might result in rotting and weakened stems. Water the plant less frequently during the winter.

If the plant does not receive enough water, the leaves may curl. In general, you may water the plant in small increments and ensure that all of the soil is saturated before watering again. Use distilled water if your plant is in a container.

If you notice dark areas with white dots on your plant, this is most likely due to calcium insufficiency. Calcium insufficiency might be a result of excessive watering or feeding. When a deficit is severe, the leaves become brown and fall off. If your plant displays indications of calcium shortage, apply a calcium-containing liquid fertilizer.

White Calathea Fusion can contract leafspot disease (produced by the fungus Leptosphaeria maculans), which creates brown patches on the leaves. This can be treated with a fungicide or the damaged areas of the plant can be removed.

Similar Posts