How Do You Care For Aglaonema White Rain?

How Do You Care For Aglaonema White Rain?

Caring for an Aglaonema White Rain plant is easy. This plant is great for beginners to indoor gardening due to its growing requirements, which are not difficult to meet.

The first thing that you need in caring for this plant is a soil mixture that drains well and contains some organic material. The following are the factors to consider when caring for Aglaonema White Rain;

Sunlight

Aglaonema White Rain needs bright indirect sunlight to full shade. If the plant is placed on a windowsill, then it would require sunlight to more than 6 hours of direct sunlight. Aglaonema White Rain does not like direct sunlight as it could burn its leaves. It can also be placed in a room with artificial light for 6 hours.

Watering

Aglaonema White Rain needs to be watered only when the soil feels dry. The plant should be watered thoroughly, so that it drains out at least two or three inches of water. Soil can’t be kept too wet or too dry. If the plant is over-watered, then it will rot and if under-watered, then it will brown off its leaves.

Soil

Aglaonema White Rain requires soil that drains well and provides nutrients for the plant. Use a soil that can provide a good drainage for the plant. The best soil for this plant is an all-purpose potting mix. Aglaonema White Rain needs a soil that is light, but rich and well-draining.

Temperature

Aglaonema White Rain plant requires a temperature between 65°F -80°F during the day at least 60°F at night, and a cooler temperature at night. Temperature above or below these could be dangerous to the plant.

Humidity

Aglaonema White Rain prefers higher humidity, mist leaves regularly throughout the day to increase humidity. Aglaonema White Rain will do well in a room with high humidity or lower humidity but the room should be ventilated.

Fertilizer

During active growth, Aglaonema White Rain should receive liquid mineral fertilizer at least twice each month. The best time to fertilize an Aglaonema White Rain is in the spring once a month with half-strength houseplant fertilizer and one time in summer with one-quarter strength houseplant fertilizer.

Propagation

Aglaonema White Rain can be propagated by stem cutting, division and seeds. If Aglaonema White Rain is propagated by stem cutting, then the bottom part of the stem should have 2 or 3 leaves, and each leaf should have at least 2 or 3 pairs of leaves. Cuttings should be placed in a mixture of peat moss and sand. The temperature should also be warm between 21 to 27 degrees Celsius. Rooting can take up to three weeks depending on the plant itself.

Repotting

When repotting, Aglaonema White Rain should be repotted after every two years when the soil feels dry and not when it is wet. When repotting, move the plant to a pot that is one size larger than the old pot. Repotting can be done in spring before the growth starts and in autumn after the growth has stopped for the year.

Pruning

Aglaonema White Rain can be pruned when it has reached the flowering stage. When pruning, Prune small branches back because they form a small amount of new leaves. The appearance of leaf tips is very important in this species as they are like flower buds. Aglaonema White Rain will form many small flowers as it grows new leaves and it also goes dormant once the temperature drops below 60 degrees Fahrenheit.

Blooming

Aglaonema White Rain will bloom from time to time. The flowers are like a spike and have a purple or white color. The flowers can be any color depending on the plant. The plant will also produce seeds which can be used for propagation when the plant has gone into its dormancy stage.

Pests and Diseases

Aglaonema White Rain is prone to a few snails and fungi, the snail is easier to control by eliminating the food source and spraying pesticides. The Fungus can be difficult to control but it will not cause major issues with your plant unless you have very weak plants. However, there are some problems that could occur. Some of them are mealy bugs, spider mites and aphids which could be controlled by spraying the leaves with water or using insecticides.

How Big Does Aglaonema White Rain Get?

The Aglaonema White Rain will grow up to 1-3 feet in height with a width of 3-6 inches. However, Aglaonema White Rain needs bright indirect sunlight to full shade. If the plant is placed on a windowsill, then it would require sunlight to more than 6 hours of direct sunlight.

Aglaonema White Rain does not like direct sunlight as it could burn its leaves. It can also be placed in a room with artificial light for 6 hours. The ideal temperature for this plant is 65 to 80 degrees Fahrenheit.

The plant should be watered thoroughly, so that it drains out at least two or three inches of water. Soil can’t be kept too wet or too dry. If the plant is over-watered, then it will rot and if under-watered, then it will brown off its leaves. During active growth, Aglaonema White Rain should receive liquid mineral fertilizer at least twice each month.

What Is The Best Time To Prune An Aglaonema White Rain?

Pruning should be done in springtime when the new leaves have formed and just before during growth. The best time to prune is when the plant is in bloom or when young leaf buds has just started to form. The plant should be maintained in good health.

Each spring, a pair of pruning shears should be used on tough stems that need to be removed if possible. This will extend the life of the plant by up to 30%. Aglaonema White Rain can be pruned when it has reached the flowering stage.

When pruning, Prune small branches back because they form a small amount of new leaves. The appearance of leaf tips is very important in this species as they are like flower buds. Aglaonema White Rain will form many small flowers as it grows new leaves and it also goes dormant once the temperature drops below 60 degrees Fahrenheit.

How Do You Make Aglaonema White Rain Bloom?

The flowers are like a spike and have a purple or white color. The flowers can be any color depending on the plant. If the plant is in a blooming stage, it will naturally bloom. However, there are a few things that should be done to get the best results from your plants.

The plant should be repotted when it reaches 1-3 feet tall and should be replanted into another container that is one size larger than its current pot. The soil should be kept moist and fertilized every four to six weeks during the springtime and summer. The following are some of the ways to make Aglaonema White Rain to bloom;

Adequate sunlight

Aglaonema White Rain needs bright indirect sunlight to full shade to bloom. If the plant is placed on a windowsill, then it would require sunlight to more than 6 hours of direct sunlight. The plant should be kept indoors and should have an area in which it receives strong lighting that is evenly distributed.

Adequate fertilizers

Aglaonema White Rain should be fertilized every two weeks during the springtime to encourage blooming. The following ingredients can be used in the fertilizer; liquid fish or seaweed fertilizer or a slow-release pellet fertilizers, which will last for three months.

Proper pruning

Aglaonema White Rain should also be pruned regularly during the spring to maintain optimum health and to enhance growth. Pruning also encourages blooming. The plant should be pruned when flowering is not occurring as it will induce new growth. Pruning should be done once every two years and can be done in springtime just before the new leaves form during the season

Temperature

The ideal temperature for this plant to bloom is 65 to 80 degrees Fahrenheit. The plant should be watered thoroughly, so that it drains out at least two or three inches of water. Soil can’t be kept too wet or too dry. If the plant is over-watered, then it will rot and if under-watered, then it will brown off its leaves.

Proper misting

Misting is a great way to simulate the tropical climate and it promotes blooming and prevents diseases. Air the plants before misting. Mist the plant with warm water, so that it does not become too wet. All these instructions will help your Aglaonema White Rain to bloom naturally. When it comes to getting the best results from your plant, you must have patience and wait for a few years for flowering as this is one of its flowering periods.

Is Aglaonema White Rain Rare?

Aglaonema White Rain is considered rare and it is very uncommon in the wild due to its fragility. It is less popular as an indoor plant because it has a short life span. Aglaonema White Rain can be grown as an indoor flower in humid conditions that are cool and warm areas with bright light. Outdoor growers usually grow this plant in shade and should be watered regularly.

The plant should be placed at least six inches of soil and no water should be allowed to pool on the ground. When growing indoors, the plant should be placed in a pot that is made from clay or brickwork and should be watered regularly and not allowed to dry out.

Aglaonema White Rain is usually propagated through cuttings, seeds, divisions and air layering. It can also be propagated by removing the side shoots of the plant during the spring. This step should only be done when the new leaves have formed. The cuttings can also be taken during wintertime after the plant has wintered indoors.