What Is An Echeveria Atlantis?
Echeveria Atlantis, also known as ‘Peaches and Cream,’ is a beautiful looking plant that’s ideal for those just starting out in the world of succulents.
Because of its very large rosettes and pink leaf tips, it is one of the succulents that is purchased the most frequently.
This comprehensive guide will provide you with all the information you want on the Echeveria Atlantis succulent, regardless of whether you are considering purchasing one or currently own one.
The Echeveria Atlantis rosette has a blue-green colour, and the leaf edges are a faint pink. If you look carefully, you’ll notice that the thin leaves are somewhat curved, and they have a small coating of farina on them.
The rosettes’ exteriors develop a powdered blue hue throughout the warm summer months. The tips turn from a pale pink to a deep pink colour over the winter, which contrasts fairly dramatically with the bluish-green colour of the leaves.
How Do You Care For An Echeveria Atlantis?
As is the case with the majority of succulents, the Echeveria Atlantis is simple to cultivate and take care of regardless of one’s level of experience.
Echeveria ‘Atlantis’ is the ideal choice for a thriller plant if you want something truly special to grow in your garden.
The flushing pink around the edges is a terrific show stopper. In addition to this, it is simple to cultivate and is an excellent choice for novices.
In addition, the following is all you need to know in order to successfully cultivate this fascinating succulent.
Echeveria Atlantis succulents prefer strong light. In any case, it is essential to shield them from the sun’s rays, particularly during the warmer months of the year when it is most likely to produce sunburn as well as stress.
During the first few weeks, you should make an effort to acclimate them by putting them in a spot that is somewhat shaded and only receives the morning sun for a few hours on a daily basis.
Then, progressively increase their sunshine exposure over a week or so until they’re in full light.
In the case that the foliage is burnt, the best thing to do is to take the rosette off of the plant. It is possible to use the leaf that you have removed for the purpose of propagation if it is not too damaged.
Use a soil that is coarse, porous, and well-draining. The mineral grit content should range from at least 50 to 70 percent, and the soil should also contain inorganic additions such as coarse sand, pumice, or perlite.
You may alternatively use ordinary potting mix and packaged cactus mix in proportions that are equivalent to one another.
Echeveria plants such as the Atlantis don’t really care for alkaline soil, but if you want to utilize it, you need make sure that your water is likewise alkaline, similar to the pH level of rainfall.
Avoid fine sand as much as possible since it may clog up the pores in the plant’s soil.
Echeveria Atlantis succulents don’t need to be fertilized regularly, but they’ll undoubtedly benefit from the extra minerals throughout their summer growing time.
Avoid fertilizing them during Autumn and Winter to give them a chance to heighten its colour.
Use a fertilizer with a low nitrogen content (no more than 5 percent) and an NPK ratio of 5-2-3 or 10-5-5, and then dilute it to at least half the amount that is advised on the label of the fertilizer.
These plants, like the majority of succulents, do not have a set timetable for when they should be watered.
To ensure that the soil is well hydrated throughout, just saturate it thoroughly in water, then wait for it to get totally dry before watering it once more a few days later.
If you see that your plant is making noticeable progress, check to see that the soil has the appropriate amount of moisture.
In the winter, you should only water them very seldom, ideally once every two weeks or so.
The temperature should be between 70 and 80 degrees Fahrenheit during the day. Evening temperatures might range anywhere from 40 to 60 degrees Fahrenheit.
It shouldn’t be stored at temperatures that are below 32 degrees or above 100 degrees Fahrenheit.
During the winter months, they have to be brought inside if the temperature falls below 42 degrees Fahrenheit.
If it is exposed to temperatures below freezing for an extended period of time, the water that is held in its membranes will freeze, swell, and explode.
When anything like this does place, there is a very good likelihood that it will perish.
How Do You Propagate Echeveria Atlantis?
Atlantis spreads by itself through a process known as offsets. However, you may speed up the process of propagation by using cuttings of the stems or leaves.
In addition, if you get the procedure down pat, it will be simple for you to expand your collection of Echeveria. In any event, executing the plan won’t be difficult.
Leaf Cuttings Propagation
When taking a cutting of a leaf, it is necessary to gently detach the leaf from the stem.
To begin, give the leaf a few gentle twists as you work your way toward removing it entirely.
To be more specific, you shouldn’t leave any of the leaf’s pieces remain. This will improve the likelihood that the propagation will be successful.
In addition, the portion of the cutting that is between the leaf and the stem is what allows roots to form when the cutting is planted.
After that, you should give the leaf some time to dry out so that the cut edges may become tough and calloused.
After it has had time to dry, place it on top of soil that has good drainage and then spray it with water.
The next step is to continue watering the soil until there are new roots growing in. The last step is to resume your typical watering routine after the leaves show signs of establishing themselves.
Stem Cuttings Propagation
The procedure for taking stem cuttings is very identical to that for taking leaf cuttings.
To begin, get a pair of scissors and make sure they are sharp.
Then, cut the top of the plant off. Leaving a gap of a few inches at the bottom, obviously. At first, you might find that this is a rather unsettling sensation.
Nevertheless, the outcome will live up to your expectations. In addition, before planting the stems in soil or propagating them in water, you should give them three to five days to become completely dry.
Obviously, this might change based on the weather in your area.
When inserting stem cuttings into soil, take care to ensure that the rosette remains erect and that the soil has adequate drainage.
You can determine whether or not it has roots by giving it a little pull. The presence of resistance indicates that it has taken hold and grown some roots.
In point of fact, the base ought to at some point give birth to additional offspring. When trimming leaves, make sure to follow the recommendations for watering that were given earlier.
Offsets are a great way to be able to quickly increase one’s collection of Echeveria.
To be more specific, offsets are the roots that form on the base of the plant and then grow upward in search of sunlight.
In any event, you’ll need to carefully work your fingers underneath the offset and then pull it free from its mother plant.
After doing this, you’ll need to plant the offset in sufficient soil, leaving the top of the offset near the surface of the soil.
Once you do this and allow it a few weeks to gain stability, it will be able to grow into a new plant.
Is Echeveria Atlantis Cold Hardy?
As a matter of fact, Echeveria Atlantis is not particularly cold hardy because it is only able to thrive in temperatures that are higher than 20 degrees Fahrenheit.
If the temperature dips below this threshold, then your succulent will not be able to live outside for very long even if it is kept in a protected location.
Or even inside if you just crack a window open.
If you are not currently cultivating your succulents indoors, it will be necessary for you to begin doing so if the temperature continues to drop to such a low point outside.
If you wish to continue growing plants outside throughout the year, another option is to invest in a high-quality miniature greenhouse specifically designed for succulents.
What Is The Ideal Light For An Indoor Echeveria Atlantis?
If you choose to cultivate Echeveria Atlantis indoors, you will still be responsible for ensuring that the plant receives an enough quantity of light, just as you would if you were growing it outside.
This may be accomplished by positioning your plant such that it sits on or near a window sill that receives the recommended 5 or 6 hours of sunshine each day.
As long as you are able to offer this, you will not have any problems, and your succulent will develop without any issues.
However, this may not be possible for some of you due to the design of your windows or the layout of your home.
If this is the case, then you need to make an investment in a good indoor grow light for succulents so that you can give your Echeveria Atlantis the amount of light it need to thrive.
Grow lights are fantastic for use with succulents because they enable the grower to supply precisely measured volumes of light to the plant regardless of the time of day or the state of the weather.