How Do You Care For Kalanchoe Beharensis?

How do you care for Kalanchoe Beharensis?

While Kalanchoe Beharensis can be grown indoors or outdoors, it is extremely easy to care for and thrives with minimal maintenance and care, these are;

Sunlight

Kalanchoe Beharensis requires bright sunlight, but should not be placed outdoors directly in the hot sun. It can tolerate partial shade and other light conditions, although its leaves will begin to turn brown if they are not provided with enough sunlight.

Soil

Kalanchoe Beharensis requires well-drained soil that’s rich in organic material. The plant will not do well when the soil is allowed to become waterlogged, therefore it’s important that it doesn’t sit in a tray of water for extended periods of time.

Many people have had success growing the plant successfully in a low maintenance indoor succulent plant potting mix.

Temperature

Kalanchoe Beharensis plant is recommended for USDA hardiness zones 11 to 12. Because the plant is indigenous to Madagascar, it thrives in warm climates. When the temperature falls below 55° Fahrenheit, the plant may begin to exhibit symptoms of distress.

Water

The plant should not be allowed to become waterlogged, it has the ability to take care of itself and will die if it becomes too wet. It will survive with as little as 1/2 an inch of water.

Kalanchoe Beharensis is a very low maintenance succulent and requires very little water initially. Once established, it may require more water during hot weather to prevent dehydration.

Humidity

You do not need to mist Kalanchoe Beharensis. When grown outdoors, the plant will tolerate up to 80% humidity. When grown indoors, it requires only low humidity of 40%-60%.

Repotting

Repot in spring or summer when the plant is dormant. Kalanchoe Beharensis is commonly propagated by cuttings and will root easily. It should be repotted every two years to provide it with fresh soil.

Propagation

Kalanchoe Beharensis can be grown from cuttings and planted outside in the summer or it can be propagated from seed. Kalanchoe Beharensis is a very easy to care for succulent plant that requires no more maintenance than a good soil, well-draining soil and bright sunlight to thrive.

Pruning

If the plant begins to become leggy, prune it back by 1/3 to promote new growth. Wait until spring or summer, as Kalanchoe Beharensis is a perennial and will not tolerate being pruned in the colder months.

What is Kalanchoe Beharensis?

Kalanchoe Beharensis is a lovely succulent with green-gray foliage and orange flowers. It is a member of the Crassulaceae family and the genus Kalanchoe. It may reach a height of 12 inches and a width of 36 inches, with uneven, velvety leaves.

The plant is a succulent belonging to the genus Kalanchoe and the family Crassulaceae. While the Beharensis is a succulent shrub, in the wild it can reach a height of 10′ to 12′ feet. It acquired common names such as Felt Bush, Elephant’s Ear Kalanchoe, Velvet Elephant Ear, Eared Elephant, Velvet Leaf, Maltese Cross, Napoleon’s Hat, and Teddy Bear due to the shape and size of the leaves.

Slowly growing, the plant produces triangular leaves with long stalks. The upper portions of mature leaves are bronze-colored, and the undersides are often silver-gray. Additionally, you’ll see many small hairs on the leaf stalks and fang-like foliage.

How often should you water a Kalanchoe Beharensis?

Water the Kalanchoe Beharensis ‘Fang’ plant 1-3 times per week or when the soil appears or feels extremely dry. You must avoid overwatering to prevent root rot from destroying your succulent plant. It is critical to follow the ‘soak and dry’ method and to water only when the soil appears or feels extremely dry.

Watering too often may cause damage. When taking your plant out of the pot, make sure you do not over water it. Plants will rot in water and soil if it is overwatered or if you don’t allow for proper drainage.

Kalanchoe Beharensis is a succulent, therefore it needs to be kept in a location that is well-lit most of the time. If you are growing your plant inside, place it in an area with bright natural light but not in direct sunlight. If you have a south facing window, this will be the best place for your plant. If you do not receive any natural light, use artificial lighting if possible.

Is Kalanchoe Beharensis a succulent?

The plant is a succulent belonging to the genus Kalanchoe and the family Crassulaceae. While the Beharensis is a succulent shrub, in the wild it can reach a height of 10′ to 12′ feet.

The plant grows best when it is planted in a location with natural and bright light. It cannot tolerate a shady location.

It needs to be watered 1-3 times per week, or when the soil appears or feels dry. You must avoid overwatering to prevent root rot from destroying your succulent plant. When taking your plant out of the pot, make sure you do not over water it.

How big do Kalanchoe Beharensis get?

Kalanchoe Beharensis (Stalactite Plant) – This erect, slow-growing succulent grows to a height of 2 to 3 feet. Its velvety leaves are 3 to 4 inches long and are not lobed but have dentations along the whole margin.

The velvety leaves are dark bronze-green on top and covered by a dense layer of hair from which the succulent develops its characteristic shape of pointed triangular leaf. The bottom side of the leaves is silver, a striking contrast to the upper side. The flowers are orange, tubular and bell-shaped, and they develop in summer on branched stalks that extend from the base of each leaf of the plant.

As with all succulents, Kalanchoe Beharensis requires very little water to stay healthy. Planting it in well-drained soil gives it even greater protection. It requires very bright light and does not do well in a shady area.

How do you grow Kalanchoe Beharensis?

Easily grown in full sun to part shade in well-drained soils. Throughout the growing season, water thoroughly, allowing the soil to dry between watering. During the winter, water sparingly to maintain a barely moist soil.

Three to four times during the spring, summer, and early fall, apply a balanced fertilizer. Fertilize in early spring after the last frost date. Feed plants in early fall before the first frost date and again in late summer before the first hard frost.

The plant requires very bright light and does not do well in a shady area. It requires very bright light and does not do well in a shady area. To prevent root rot, which is common in Kalanchoe Beharensis, the plant should be planted in well-drained soil.

When taking your plant out of the pot, make sure you do not over water it. Plants will rot in water and soil if it is overwatered or if you don’t allow for proper drainage.

When the plant begins to grow, prune it by 1/3 to promote new growth. Wait until spring or summer, as Kalanchoe Beharensis is a perennial and will not tolerate being pruned in the colder months. You should choose a pot large enough so that the plant can be watered easily without allowing the soil to dry out too quickly between watering.

How do you propagate Elephant Ear Kalanchoe?

Propagating Kalanchoe Elephant’s Ear from Stem or Leaf Cuttings. Spring is a good time to take stem cuttings From March to May before the soil warms up and begins to dry out. The following are the steps when propagating by stem cutting;

  • Remove all of the wilting leaves from the stem by pinching off each leaf.
  • Place the stem in a glass with a well-draining potting medium such as peat, perlite, or sterile vermiculite. Keep the soil damp but not wet so that roots can form.
  • Place the glass with the cuttings in a bright location (south facing window or day-light – filtered location)
  • It takes about 30 to 45 days for roots to start showing from the bottom of the stem, but generally around 60 to 70 days. After this point you should be able to see roots at about 1/4″ or 1 cm below the surface of the medium. Continue watering as you see new growth.
  • By the end of the growing season you should be able to see roots starting to appear at soil level, however this can take a little longer.
  • Once roots start growing you can begin repotting into a larger container. The original pot should be left by the plant as it will continue to root from this zone and may be needed again next year. Once you have taken a piece of stem, cut off all the leaves except 1 or 2 that have developed into new plants.

Is Kalanchoe Beharensis toxic to cats?

Though Kalanchoe is not one of the most toxic houseplants for cats, it is a highly popular one that might induce gastrointestinal discomfort, so it is worth noting. Also known as mother-of-millions, this succulent can occasionally induce an irregular heartbeat.

Keep Kalanchoe plants away from cats in your home. However, ingestion of the plant might cause gastrointestinal upset and diarrhea. Some sources state that Kalanchoe plants can cause rashes or breathing problems for some animals.

Keep Kalanchoe away from pets to prevent any issues that could develop as a result of touching or ingesting it. Kalanchoe Beharensis is certainly a striking and unusual looking plant, so an indoor Kalanchoe makes a great addition to any office or home decor.

The 1,000’s of succulent leaves make this plant an interesting conversation piece. While it is not necessarily toxic to cats, if your cat is already sick with a heart or respiratory condition, you might want to keep this off your list of houseplants.

Similar Posts