How Do You Germinate Rex Begonia Seeds? [Here's The Answer] Studynature

How do you germinate Rex Begonia seeds?

This plant can be grown from seeds. Begonia seeds are quite tiny and require light to germinate. The main factors are:

Sow seeds indoors at temperatures ranging from 68° to 75°.
There is no need for a cover because light promotes germination.

The microscopic, dust-like seeds should germinate in 15-20 days.
Sow the seeds indoors at any time.
Sow wax begonias 12 weeks before planting out and tuberous begonias 12-16 weeks before planting out for outdoor use.

It is recommended a maximum planting depth of 4X the width of the seed when spreading seed outdoors.

How do you grow Rex Begonia?

Rex Begonias grows primarily in the spring and summer. They require stable temperatures of roughly 70°F during the day and 60°F at night, moist air with sufficient circulation, and a light, slightly damp growing medium that is constantly moist but never waterlogged or severely dry.

Set the pots in a tray of moist pebbles to keep the humidity up. Rex Begonias will thrive in a window garden with strong, diffused light but no direct sunlight on the foliage, unless it is extremely early or very late in the day. They must be kept safe from drafts.

A Rex Begonia can be cultivated outside as long as the night temperature stays above 50 degrees. They make fantastic porch plants and look beautiful in any largely shady yard. Window boxes facing north or otherwise shaded from harsh sun are ideal for displaying a variety of leaf hues and shapes.

How do you identify a Begonia rex?

These are foliage begonias that are almost a hot house variety. They thrive in temperatures ranging from 70 to 75 degrees Fahrenheit (21-24 C.). The heart-shaped leaves are the most eye-catching foliage producers.

The leaves can be brilliant red, green, pink, silver, gray, or purple in a variety of designs and combinations. The leaves are slightly hairy and textured, adding to the foliage’s appeal. The blossoms will usually be hidden within the foliage.

How do you keep begonia rex alive?

Rex begonias are among the easiest of all begonias to keep alive. They require stable temperatures of roughly 70 degrees during the day and 60 degrees at night, moist air with sufficient circulation, and a light, slightly damp growing medium that is constantly moist but never waterlogged or severely dry.

Set the pots in a tray of moist pebbles to keep the humidity up. Rex begonia likes bright light but no direct sunlight on the foliage, unless it is extremely early or very late in the day. They must be kept safe from drafts.

Rex begonias are tropical plants, and as such require protection from freezing temperatures. To keep a Rex Begonia alive indoors during the winter months, provide it with some artificial light so that it will enter a semi-dormant state.

How do you propagate Begonia rex escargot?

Both leaf and stem cuttings are simple to produce and do not necessitate digging up the plant. The key distinction between them is the section of the plant from which the new plant will be grown.

Escargot Begonia Propagation from Stem Cuttings:

To create a cutting, use a healthy stem that is at least 4 to 6 inches long. The best ones are those with only a few leaves and no flowers.

Make the appropriate number of cuttings based on your level of confidence, experience, and the quantity of new plants you want. You want to cut the stem directly beneath a node.
Immerse the stem cuttings’ tips in water. You can use either a glass or a jar. As the water becomes cloudy, change it. After a few weeks, you’ll notice roots sprouting from the stem.
You can either put them into new, well-draining potting soil at this point or wait a little longer. Stem cuttings can be kept in water for months at a time. However, you will eventually need to relocate them to soil.

It will begin to produce leaves within the next few months.

Escargot Begonia Propagation from Leaf Cuttings:

Cutting leaves is less difficult than cutting stems. However, because you’re starting from a leaf, it takes longer to root than stem cuttings. Here’s how to go about it.

Choose a leaf from your plant that is in good health.
Cut the leaf in half across the biggest veins. This will provide you with a few parts of the leaf from which to reproduce.
Press them into the ground. You can pin them down or place small pebbles on top of them to keep them on the soil. You’ll notice some progress in around 6 weeks.

You can transplant each of the new plants into their own containers once they reach about 3 inches in height and have at least a few of leaves.

How do you propagate Begonia rex stems?

When it comes to Begonia propagation, all begonias can be grown via rooting stem cuttings, often known as tip cuttings. The main concept behind this type of propagation is that a plant will clone itself by sprouting roots on a portion of stem placed in water or a wet growing medium.

First, select a stem that is 2 to 5 inches long with a couple of leaves attached. Remove both bottom leaves so that the plant has only one leaf remaining. Select a clean and soil-free area for planting the cuttings, and place the stem in water.

The stem will root within three to five days. Treat the roots as you would any other newly-propagated plant, such as growing it in soil or using a rooting hormone (if necessary).

How do you propagate Begonia rex vines?

This plant can be propagated in three ways. They’re all simple and enjoyable.

Water-rooted stem cuttings: Cissus discolor grows easily in water. Simply cut a 6-inch-long section of the stem off. It should have three to four leaves.

Remove all except the top leaf and immerse the cutting’s base (the part closest to the roots) in a jar of water for 1 to 2 inches. Roots will appear in 4 to 6 weeks. At that point, you can pot up the cutting in a clean container filled with sterile potting soil that drains properly.

Soil-rooted stem cuttings: As previously stated, prepare your cutting. Dip the stem’s bottom 1 inch in rooting hormone. Then, place the hormone-dusted end of the plant in a clean 3-inch container filled with sterile potting soil.

To keep the humidity high, place a clear plastic baggie over the entire pot and plant. As needed, add water. Within 4 to 6 weeks, the cutting will establish roots, at which point you can remove the bag.

Layering: Cissus discolor is one of those interesting plants that can produce roots all down its stem anywhere a leaf node comes into contact with soil. A leaf node is the location on the stem where the leaf is attached. Roots can form at this point.

Pin the vine to the surface of a pot filled with sterile potting soil with a hairpin or a piece of bent wire to propagate it through layering. Keep the pot moist, and roots will grow at the pinned leaf node within a few weeks. Then, clip that part of vine away from the mother plant and nurture it as a separate plant.

How do you propagate begonia rex in water?

To water propagate your Begonia, just immerse the stem in water while leaving the leaves sticking out. Then, to ensure ideal growing circumstances, place the vase or glass containing the plant in a bright and warm location.

There’s no need to use a soilless mix or rooting hormone because these plants desire to grow. They can be started in a glass of water. Keep the begonia cut stems cool and moist until you’re ready to place them in a transparent vase or jar of water.

Make sure you know which side is up, because putting the tips down in the water can prevent the cuttings from rooting.

Rhizomatous begonias, such as the rex begonia, can be propagated readily through rhizome division during repotting. Almost all begonia species can be propagated from leaf-tip cuttings. A rooting hormone might assist the cuttings in sprouting.

How do you propagate begonia rex?

Rex begonia can be propagated. Rhizomatous begonias, such as the rex begonia, are easily propagated through rhizome division during repotting. Almost all begonia species can be propagated from leaf-tip cuttings. A rooting hormone might assist the cuttings in sprouting.

Rex Begonias can also be propagated by pinning a leaf to the bedding mix and making minor incisions in the leaf veins, or by immediately inserting a leaf (with a petiole) into the soil. The petiole is the stalk that connects the leaf blade to the stem of the plant.

How do you repot a leggy rex begonia?

Rex begonia can be re-pot in the spring of their second year and again after blooming. The plant should be repotted once a year, but if it is growing too high, it can be repotted every other year. Only use potting soil that drains well (drainage is important to prevent root rot).

The top of the soil should not be covered by more than a 1/2-inch layer of soil. Water lightly during the first week or so, then let the soil dry out between waterings.

A rex begonia plant is a type of begonia that has trailing foliage, the plant can become quite leggy if it isn’t repotted at the correct time. In fact, many rex begonias grown indoors develop new stems that are more than a foot long.

These stems usually become too weighed down for the plant to produce leaves and flowers. If you notice this occurring with your rex begonia, you should repot it so that the stem remains upright. The plant will recover and start producing new stems before it reaches the desired length.

Repot the rex begonia when the following occurs: · The root-ball is sticking out of the pot. · When repotting is necessary to prevent overgrown stems and foliage that isn’t producing flowers or leaves.

How do you revive a begonia rex?

If your begonia rex is not thriving and appears to have poor root growth and you’re not sure why, check the drainage of the potting soil. If it’s too wet, the roots of the begonia will wither and die.

The best way to revive a begonia is to keep it moist, but don’t overdo it. Don’t keep your plant constantly wet. Instead, allow a little dry time in between watering so that there’s no waterlogged soil in the pot.

If you have a rex begonia that is very leggy and hasn’t been repotted for a long time, re-potting it will restore the plant to full health. The best time to do this is during its flowering season. If the plant is growing outdoors, wait until springtime or early summer.

While the soil should be well drained, use a potting soil that has been amended with additional special nutrients designed for cuttings like plant food and fertilizers.

How do you save an overwatered begonia rex?

Rex begonias are a particularly finicky culture to begin with, so it is not uncommon for them to become overwatered. This can happen in any kind of weather, so be sure to pay attention to the soil and the leaves.

Your rex begonia should be watered liberally when the soil sits dry. Be sure that you see water seeping out of the pot or growing medium through its bottom before you water your rex begonia again.

How to Fix a Drooping Begonia Due to Acclimation: Try to keep your plant at a comfortable temperature on the way home, and if feasible, bring your plant home as soon as possible.

Place your plant in bright, indirect light, with high humidity and a somewhat moist soil. Avoid oversaturating the soil or allowing it to fully dry up.

If your begonia is drooping excessively, inspect the roots for symptoms of rot. If root rot is present, the afflicted roots should be trimmed and the plant repotted in a new container and soil.

How to Restore a Wilting Begonia: To lower the danger of disease, it is critical to provide settings conductive to healthy growth. Check that the soil drains adequately, minimize overwatering, and provide appropriate lighting and ventilation. This should mean that you won’t have to deal with sickness issues as frequently.

Temperature stress: It can also be a concern if you place your begonia near a drafty window, air conditioning vent, or heating device; this can generate enough temperature stress to cause your begonia to wilt.

Temperatures below 50°F (10°C) can cause direct plant damage, resulting in wilting, whereas hot, arid circumstances produce fast water loss and wilting due to an imbalance between water absorption and water loss.

You can keep a digital thermometer that records the current temperature as well as the maximum and minimum recorded temperatures. As a result, you’ll be able to detect a temperature problem quickly and relocate my plant to a more pleasant area.

How do you take care of a begonia rex?

How do you take cuttings from a begonia rex?

Rex begonias are not only lovely and graceful, but they are very simple to cultivate from leaf cuttings. This is how you may get more of these wonderful plants for free.

Step 1: Gather your materials for propagating rex begonias.

Step 2: Take a leaf cutting from your rex begonia.

Step 3: Cut the rex begonia leaf. Flip the begonia leaf over and use your knife to make a 12-inch cut across five or six of the main veins. In the photo above, I’ve sliced each vein approximately an inch from the central vein. These incisions (together with the stem cut) will result in the formation of additional plantlets.

Step 4: Insert the rex begonia leaf into the seed-starting mixture. Reverse the begonia leaf and press it into the seed-starting mix. Then, to maintain the cuts in touch with the mix, begin inserting T-pins into the soil through the leaves. Use as many as necessary to keep the leaf flat. If you poke a pin through a primary leaf vein, the vein may not root.

Step 5: Give the begonia leaf cutting humidity and light. Wrap your container in plastic wrap or cover it with its dome. However, avoid allowing the plastic to come into contact with the foliage to avoid fungal problems.

Maintain a temperature of around 70 degrees Fahrenheit and a high humidity level for your leaf cutting. You can sprinkle every day and water it once a week.

Give them light: place fluorescent lights 6 inches above the cuttings and leave them on for around 12 hours each day until the young plants emerge. You might also place your leaf cuttings in an east window as long as the temperature is consistently warm.

How do you transplant a rex begonia?

When transplanting a begonia to a larger pot, choose a slightly larger pot for the transplant. Slightly refers to selecting a pot that is an inch (2.5 cm) larger than the previous pot.

It is preferable to gradually expand the size of the pot as the plant grows rather than forcing it into a large container, which might cause root rot. Make sure the plant has a strong root structure before repotting. Choose a pot with sufficient drainage holes.

Make a soilless planting medium from of peat moss, vermiculite, and perlite in equal quantities. To assist manage humidity, add a couple of teaspoons of crushed limestone to the medium. Mix thoroughly and wet with water.

Remove the begonia from its container gently and place it in the new medium right away. Water the begonia transplant and acclimatize it in a shaded place.

How do you water Begonia rex?

Regular watering is required for Rex begonias, but be careful not to over-water them. They also prefer humidity but dislike direct misting, which promotes powdery mildew. Before watering, allow the soil surface to become dry to the touch.

Water should be applied exclusively to the soil and not to the leaves to reduce disease concerns. Watering early in the day allows the foliage to dry before evening. Reduce watering to once every two to three weeks during the winter, when the Rex begonia isn’t actively growing.

How many types of begonia rex are there?

The Rex begonia is a type of begonia.

A wide variety of Rex begonias are available. They are typically named after the color of their flowers or foliage, so you can find Rex begonias that produce flowers in red, pink, orange and white hues. Leaf shapes vary widely as well. There are more than 500 species of Begonia rex.

How many varieties of Begonia rex are there?

Rex Begonia is a popular houseplant grown for its attractive foliage all over the world. These rhizomatous begonias are easy to grow and come in a variety of leaf shapes, colors, and patterns. Many cultivars have striped or variegated foliage, and some have spiral-shaped leaves. There are about 500 different types of Rex Begonia!

Share on Facebook

Save

How Do You Germinate Rex Begonia Seeds?