How Do You Propagate Balfour Aralia?

How Do You Propagate Balfour Aralia?

Balfour Aralia can be easily propagated by seeds, cuttings, and division. The seeds can be planted at any time of the year. Propagating Balfour Aralia via cuttings is the simplest and easiest way to propagate this plant, as it only needs a little pair of sharp scissors.

This is because Balfour Aralia has a very shallow root structure and does not have a lot of leaves. As for division, you should first remove about three inches from the root to avoid damage to the plant’s roots.

When propagating this plant, you should use a very small amount of rooting hormone and water the plant thoroughly. The best time to take cuttings is in spring and summer for good and strong root formation.

You should only use sharp scissors and never twist any part of your plant’s stem. Balfour Aralia can easily be propagated through cuttings. The cutting must be between 1 and 2 inches long. The following are the steps to follow when propagating:

Propagation from cuttings;

  • To take cuttings from a stem for propagation, make a diagonal cut immediately below some new leaf nodes.
  • The cutting must be at least eight inches in length and contain three to four leaf nodes.
  • Always use sterile and thoroughly disinfected tools for propagation when taking cuttings.
  • Before planting cuttings in freshly-mixed soil, allow them to dry for approximately a day.
  • Before placing the stem cutting in the soil, lightly wet the soil. Place the freshly propagated plant’s container in a bright and warm location. In a few weeks, there will be fresh growth
  • Make a 2.5-inch-long incision through a leaf node on this stem. This cut requires a clean and sharp gardening knife.
  • Then, put rooting hormone on the wound and cover it with a tiny amount of sphagnum moss and black plastic. Effectively seal it with waterproof duct tape.
  • You must leave this wrapping on for about one year. Unwrap it periodically to replace the old sphagnum moss and check for the emergence of new roots.
  • When enough substantial roots emerge, cut the stem beneath the rooted portion. This stem should be buried in freshly mixed potting soil.

Propagation from seeds;

  • Take one seed and plant it in a pot filled with moist soil. The seed should be planted as deep as possible.
  • Fill the pot with very well-draining soil so that it is at least one inch below the surface of the soil. The soil should be dry enough to prevent damaging the roots.
  • Place the Balfour Aralia seeds in a plastic bag and keep them in a cool, dry place for three months, until they begin to sprout in the early spring.
  • After they have sprouted and grown to a length of one inch, transplant them into a pot that is at least one-inch deep.
  • Cut off the flower stems. Place a thin layer of soil on the base of the pot and place the plant in a location that receives plenty of sunlight and has an average temperature between 65 and 85 degrees Fahrenheit.

Propagation from division;

  • You should divide the plant when it has lots of aerial roots.
  • You can take this method of propagation when you are propagating several new plants at once or if you have a plant that is already very large.
  • Remove up to one-half of the aerial roots and spread them out evenly in a pot filled with moist soil as soon as possible after they are cut, because they tend to dry quickly and be damaged when exposed to the air.
  • Make a diagonal cut toward the base of the plant’s root system.
  • Remove a portion of the soil from the pot and place it between two pieces of paper towel.
  • Dip a sharp knife in some very hot water to sterilize it and then carefully make a slit in each piece of paper towel to form a small pocket for each piece of root.
  • Place cuttings into these pockets, so that they are completely covered with soil, but still able to expand appropriately at their rate.
  • Place the whole pot in a bright location with an average temperature of 65 to 85 degrees Fahrenheit.
  • Water the new plant very carefully, so that it will not be damaged by being over-watered or washed away by water that is too forceful.

How Tall Does Balfour Aralia Get?

The Balfour Aralia plant can reach a height of 6 feet and a width of 3 feet indoors; however, transferring it to a new area can cause the leaves to fall off. They are easy to cultivate in medium light but will grow more quickly and densely in bright light.

With proper care and well-drained and aerated soil. This is because this plant cannot survive even brief periods of waterlogging. Additionally, the soil should be able to retain moisture for the plant’s health.

The ideal sunlight for the Balfour Aralia is in the morning, for this is when it receives a modest amount of sun.

You should also avoid placing your Balfour Aralia near a southern-facing window, for this is the window through which intense sunshine enters.

When watering your Balfour Aralia plant, start from the ground level and work your way up. Water the plant’s roots and not the stem’s leaves. This is because the Balfour aralia plant has a very shallow root structure, so it does not have any need for deep soaking that could cause root rot.

The average size for a Balfour Aralia pot is at least one foot in height, two feet in width, and five inches in depth. Any other kind of container could be used, depending on your taste. You should water the soil every two to three weeks during the summer. Also, water your plant every two weeks during cold months.

Pruning of Balfour aralia is not necessary as long as its leaves are healthy, but you may need to prune to shape the plant for a better look on your patio. As this plant grows up, some stems may bend and it could be difficult for you to reach those parts.

The ideal temperature for Balfour Aralia is between 65 and 85 degrees F. However, this plant will endure extreme cold. If you need a smaller pot, the roots can be transplanted into it if the pot’s volume is at least five percent greater than the original container. The propagation of Balfour Aralia is not a difficult process. It can grow in shallow soil, in soil that is less than1-inch deep, or in a very moist soil mix.

How Do You Grow Balfour Aralia From Seeds?

When growing Balfour Aralia from seeds is quite easy, if you know how to do it. All you have to do is either sow the seeds directly in the pots or directly on the soil, or you can simply plant seedlings right after they are ripe. If you wish to sow Balfour Aralia seeds directly in the pot, then use a mixture of one-fourth peat moss, one-third well-draining soil, and one-third sand.

However, it will also take patience and a little time. The seeds can be kept in a plastic bag in a cool, dry place until they germinate. Once they begin to sprout, you can place them individually into small pots or saucers filled with moistened soil.

If you choose to sow Balfour Aralia seeds directly on the soil, then you should also place them in a plastic bag and store them in a cool and dry place. The seeds can be planted anywhere between the last week of February and the first week of March. When watering your plants, water them with a light sprinkling of water so that the root system will not be damaged.

As this plant grows up, some stems may bend and it could be difficult for you to reach those parts. The ideal temperature for Balfour Aralia is between 65 and 85 degrees F. However, this plant will endure extreme cold.

As the Balfour Aralia grows up, you can cut it back and allow its roots to develop fully. The plant will continue growing without any need for additional pruning.

If your Balfour Aralia develops a lot of aerial roots during growth, then you should trim them off. This is because they are roots, but they serve as a support for the plant and grow very close to the main part of the plant’s root system. You should never pull aerial roots out because this may damage your plant.

 What Does Balfour Aralia Look Like?

The unique leaves of a Balfour Aralia resemble leathery, circular, 1′′- 2′′ in diameter dinner plates, thus the plant’s moniker, Dinner Plate Aralia. The leaves can range in hue from pale green to dark green and some types include green and ancreamam colored variegated foliage.

It may grow as much as 6 feet high and 3 feet wide indoors; unfortunately, it loves to stay put, as moving it to a new area can cause the leaves to drop. They are easy to grow in medium light, they will develop quicker and lusher if you keep your plant in a sunny position.

The leaves are divided into leaflets, much like the leaves of an oak or maple tree. Each leaf has about three to six leaflets on it.

The leaflet shape is either oval-shaped or pointed, with saw-tooth edges that are usually light green. The flowers are borne on short lateral branches. Each small, oval-shaped flower has five bright-orange petals and is about 1½ inches across.

Balfour Aralia is a tough plant that thrives in places where other plants struggle to survive. The soil should be well drained and airy with lots of sunlight. It requires a soil pH between six and eight for best results, but it can survive in as little as three inches of water per week to a more extended period of up to two months of drought.

The roots of a Balfour Aralia plant are shallow, so they can easily be damaged if you are moving them. It is best to plant the plant in a spot where you will leave it.

Similar Posts