How Do You Repot Rhaphidophora In Hayi?
What Is A Rhaphidophora Hayi? Rhaphidophora hayi is a shingling climber plant in the Araceae family. It is native to Queensland and New Guinea. They remain flat and have a distinct growth pattern. This lovely aroid is also known as a “shingle plant” since it grows in a shingling pattern! Shingling occurs when the leaves…
What Is A Rhaphidophora Hayi?
Rhaphidophora hayi is a shingling climber plant in the Araceae family. It is native to Queensland and New Guinea.
They remain flat and have a distinct growth pattern. This lovely aroid is also known as a “shingle plant” since it grows in a shingling pattern! Shingling occurs when the leaves of a climbing plant grow flat, pressed flat against the tree or trellis, rather than expanding outward or fanning.
They are also epiphytic, which means they must grow on a supporting tree or plant from which they get some of their nutrients. Most Hayi plants with more than a leaf or two will grow up along a wooden board
How Do You Prune Hayi Rhaphidophora?
Pruning is mostly used to remove unhealthy or pest-damaged material and maintain a specified size. It can also be used to minimize leggy growth caused by insufficient light reaching one side of the plant.
Cut off unwanted growth with clean snips, but don’t take off too much of the plant at once. It’s fine to reduce it by up to 25%, but any more than those risks causing damage to your plant.
💥🎁 Christmas & Year-End Deals On Amazon !
Don't miss out on the best discounts and top-rated products available right now!
🛒 Shop Now & Save Big Today!*As an Amazon Associate, I earn from qualifying purchases.
Except for removing dead, diseased, infected, or yellow leaves, shingling plants rarely require trimming. This will stimulate development by allowing more light to reach the leaves.
You can also prune this plant to keep it at a specific size or form. However, don’t cut more than 30% of the plant at once. You will weaken it if you do not. To avoid the transmission of illness, use a sterilized pruning knife, scissors, or shears when pruning.
Finally, in addition to pruning, it is a good idea to wipe the leaves to make them appear nice and deter pests.
How Do You Repot Rhaphidophora In Hayi?
It is ideal to re-pot the plant once or twice a year, or when it has outgrown its pot and become root-bound. Choose a new pot that is 1 inch larger in diameter than the present pot for repotting.
Remember to choose a pot with drainage holes. Early Spring is the best time to re-pot because the plant will be actively growing.
These plants do not have large root balls and do not require repotting on a regular basis. Repot your Rhaphidophora hayi every 2 to 3 years or when they get root-bound.
💥🎁 Christmas & Year-End Deals On Amazon !
Don't miss out on the best discounts and top-rated products available right now!
🛒 Shop Now & Save Big Today!*As an Amazon Associate, I earn from qualifying purchases.
Repot in the spring, using a pot that is 2-3 inches wider and deeper than the previous one.
How Do You Identify Hayi Rhaphidophora?
Rhaphidophora hayi is a species found in Queensland and New Guinea.
It grows on coralline limestone and basalt in primary and secondary monsoon or rain forest in Indonesian Papua, Papua New Guinea (including New Britain, New Ireland, Bougainville, and Muyua (Woodlark) Island), and Australia (eastern tropical Queensland).
It is a medium-sized, slender to somewhat robust, semi-leptocaul, homeophyllous neotenic liane to 5 meters tall, forming small terrestrial colonies with a rectangular to terete cross-section, widest side prominently convex, smooth, dark green stem lacking prophyll and cataphyll fiber but with very thin, adherent, petiolar sheath tissue separated by slight straight scars.
On attached branches, the leaves are distichous, shingling and ascending, whereas on free shoots they are tightly clustered or somewhat dispersed.
The lamina is broadly to narrowly ovate-elliptic, coriaceous, with a truncate to cuneate or cordate base that is momentarily decurrent, and an acute apex with a small tubule.
💥🎁 Christmas & Year-End Deals On Amazon !
Don't miss out on the best discounts and top-rated products available right now!
🛒 Shop Now & Save Big Today!*As an Amazon Associate, I earn from qualifying purchases.
Shingle plant has solitary inflorescences that are supported by a membranous, caducous prophyll and one or more identical cataphylls with a somewhat laterally compressed peduncle. The spathe is canoe-shaped, with a robust beak, tough flesh, and a yellow color. The spadix is yellow and cigar-shaped.
How Do You Water Rhaphidophora Hayi?
Rhaphidophora hayi requires a moderate amount of water. They prefer damp soil, but not soggy that it causes root rot. Also, don’t let it get too dry because it can inhibit growth and curl the leaves.
When the top 2 to 3 inches of soil or potting feels dry, water these shingle plants. During growing seasons, this will usually happen after about a week (spring and summer). The actual time will, however, be determined by your indoor conditions – humidity, temperature, light, and so on.
Reduce watering to once every two weeks during non-growing seasons. You can wait until the earth is almost dry. This won’t do any harm.
Soak water on your plant until excess runs out of the drainage holes when watering. If any accumulates on a saucer, throw it away.
Finally, if you have a sphagnum moss pole, you should shower it on a regular basis.
- a) Overwatered Rhaphidophora hayi: Overwatering can occur because to an oversized pot, poorly draining soil, or overwatering. It will cause root rot and kill your plant if not treated early enough.
💥🎁 Christmas & Year-End Deals On Amazon !
Don't miss out on the best discounts and top-rated products available right now!
🛒 Shop Now & Save Big Today!*As an Amazon Associate, I earn from qualifying purchases.
Yellowing leaves and moist, soggy soil are signs of overwatered Rhaphidophora hayi or shingle vines.
Other warning indications include squishy stem bases, rotten potting mix, wilting, and leaf fall.
- b) Underwatered: When R. hayi leaves are submerged, they curl, turn yellow, and have crispy, brown tips or edges. In addition, the soil will be dry, causing your plant to grow slowly.
How Fast Do Rhaphidophora Hayi Grow?
First off, Rhaphidophora hayi has a medium growth rate, which is heavily influenced by growing conditions. It grows considerably faster in a sunny, warm, humid climate with moist soil.
- hayi can reach lengths of up to 32 feet (approximately 10 meters) in the wild. It has no boundaries. However, in your garden or as a houseplant, it may not live that long. Expect it to be a couple feet long, possibly up to 5 feet.
What Do I Do When My Rhaphidophora Hayi Outgrows The Board?
Your hayi plant will most certainly outgrow the board quickly because they are such fast-growing plants. When this happens, simply add a wider board to it to encourage the plant to wrap around it rather than merely climb up it.
It won’t be long before it outgrows the board! Joann Fabric and Craft has it in the craft plywood division. They are also available at Home Depot and Lowes. To prevent decay, make sure to stain and seal the board first.
How Do I Tell Rhaphidophora Hayi Leaves?
Rhaphidophora hayi, for starters, has small to medium (1 to 5 inch) oval, dark green leaves. The leaves are usually smaller when they are young. However, as these aroids have vertical support to shingle on, their leaves grow larger.
💥🎁 Christmas & Year-End Deals On Amazon !
Don't miss out on the best discounts and top-rated products available right now!
🛒 Shop Now & Save Big Today!*As an Amazon Associate, I earn from qualifying purchases.
Second, the leaves have a short petiole, grow vertically, and mainly overlap as they mature. They are smaller, but less densely packed.
Another important feature of this shingle plant is that the leaves do not change morphologically from juvenile to mature. Some aroids have no fenestrations or splits. Nonetheless, they grow in size.
Finally, unlike most climbing vines, the leaves normally lie flat on the support and do not fan outwards.
How Much Light Does Rhaphidophora Hayi Need?
Rhaphidophora hayi grows best in bright indirect light, although it can also thrive in medium to low light.
However, in poorly lit places, they will grow slowly or leggy, and the leaves may turn yellow in extreme circumstances. Dark areas necessitate the use of grow lights such as GE Lighting (cheap) or MARS HYDRO. These plants aren’t bothered by artificial lighting.
However, do not place your shingle plant in direct sunlight. The hot sunshine may bleach or scorch the leaves, causing their edges and tips to become crispy and browned.
💥🎁 Christmas & Year-End Deals On Amazon !
Don't miss out on the best discounts and top-rated products available right now!
🛒 Shop Now & Save Big Today!*As an Amazon Associate, I earn from qualifying purchases.
As a result, while determining where to place your plants, make sure they get plenty of bright indirect light while avoiding direct sunlight.
Grow Rhaphidophora hayi in a darkened area (filtered light) or with a 30 to 40% shade cloth if growing it outside. Amazon has a large selection.
Is Rhaphidophora Hayi An Annual Or Perennial?
Rhaphidophora hayi is a wet, tropical lowland coralline limestone and basalt rainforest aroid. It is common in Papua New Guinea, Indonesian Papua, and Queensland, Australia.
It can be found in Bougainville, New Ireland, Muyua (Woodlark Island), New Britain, and other parts of Papua New Guinea.
This aroid is an evergreen, perennial climbing hemiepiphyte. As a result, it spends a portion of its existence as an epiphyte (a plant that grows on other plants) and a terrestrial plant or liana (has roots in the ground).
It is commonly found shingling on tree trunks, rocks, or any other support. The stem grows firmly or tightly to the vertical structure, and the leaves rest flat against it, providing a lush, dark green shingle impression.
💥🎁 Christmas & Year-End Deals On Amazon !
Don't miss out on the best discounts and top-rated products available right now!
🛒 Shop Now & Save Big Today!*As an Amazon Associate, I earn from qualifying purchases.
Finally, Rhaphidophora hayi has a medium growth rate, which is heavily influenced by growing conditions. It grows considerably faster in a sunny, warm, humid climate with moist soil.
How Often Do You Fertilize Hayi Rhaphidophora?
During the growing season, feed the plant every two weeks to once a month with a balanced houseplant fertilizer diluted to half strength.
Do not fertilize your plant in the late fall and winter, when development has slowed and the plant is dormant. Too much fertilizer might cause your plant’s foliage to burn. Make sure the soil is wet before applying any type of fertilizer.