How Do You Take Care Of Aeonium Arboreum Atropurpureum?

How Do You Take Care Of Aeonium Arboreum Atropurpureum?

The succulent Aeonium atropurpureum is quite lovely. It can reach a height of 3 feet. Many branches generate rosettes of leaves from the trunk.

The plant’s leaves are the most noticeable feature, as they are green at the base and darken to a purple-tinged crimson at the edges.

Here is how to look after Aeonium atropurpureum.

Light requirements

Aeonium atropurpureum, which is grown as a houseplant, needs a sunny area with enough of direct sunlight all year. If the light is insufficient, the leaves become distorted and elongated before dying. The optimum placement is a sunny and warm south window.

Water requirements

Aeonium atropurpureum should be watered sparingly. Succulent roots need only be kept mildly damp. Check that the top 1 to 2 cm of soil is dry before watering again. Overall, it is preferable to water this plant infrequently rather than frequently.

During the rest season between October and February, Aeonium atropurpureum like to be watered lightly. This succulent requires just enough water to keep the soil from drying out completely.

Aeonium atropurpureum, like many succulents, does not tolerate waterlogging. After watering, excess water must be let to drain freely or emptied out of the pot because dampness causes root rot in these succulents.

Rainwater is less expensive for the Aeonium atropurpureum, but it also enjoys regular tap water that is not too calcareous.

Soil requirements

A substrate blend of nutrient-poor soil and mineral components is appropriate for Aeonium atropurpureum. A succulent substrate should be water permeable so that no water accumulates after watering.

This can be accomplished by combining 60% succulent soil (also known as cactus soil) and 40% mineral components such as gravel or perlite, lava rocks, and some quartz sand.

The airflow of the substrate is supported by the open-pored mineral components, perlites, and granules. They retain nutrients and moisture while allowing excess water to drain quickly after watering.

Climate requirements

Aeonium atropurpureum grows at temperatures ranging from 18°C to 23°C. These succulents prefer temperatures around 12°C and as much direct sunlight as possible during the winter. Aeonium atropurpureum does not withstand temperatures below 10°C.

Fertilizer requirements

During the growth phase, fertilize Aeonium atropurpureum with a dilute solution of succulent fertilizer every four weeks. During the rest period, do not fertilize.

What Is Aeonium Arboreum Atropurpureum?

The aeonium arboreum Atropurpureum (Black Tree aeonium) is an eye-catching dark-colored succulent with huge leafy rosettes. This striking aeonium is also known as the Purple Rose Tree or the Dark Purple Houseleek Tree.

When grown in full sun, the dark leaves of this aeonium cultivar turn virtually black. This purple aeonium’s fleshy foliage is made up of huge rosettes.

Purple Rose aeonium flowers are little star-shaped clusters. When the flower clusters bloom in the spring, they form huge pyramid formations and are usually bright golden yellow.

The woody shrub-like succulent Aeonium arboreum ‘Atropurpureum’ has numerous stems. The plant grows to a height of 3 to 5 feet (1 to 1.5 meters).

The aeonium ‘Atropurpureum’ is quite similar to the aeonium ‘Zwartkop.’ The distinction between these two cultivars is that aeonium ‘Zwartkop’ has very dark foliage, tall arching stems, and enormous heads, whereas aeonium ‘Atropurpureum’ has dark maroon purple foliage, shorter stems, and smaller heads.

What Is The Common Name For Aeonium Arboreum Atropurpureum?

This plant is endemic to the Canary Islands in the Mediterranean Sea. It’s an eye-catching evergreen with rich purple foliage on its rosettes. Rosettes are characteristic of all Aeonium plants. The following are some basic material information of Aeonium arboreum Atropurpureum.

Purple Rose, Black Rose, Purple Rose Tree, Dark Purple Houseleek Tree, and Black Beauty are some of its common names, all of which are evocative of its look.

What Is Aeonium Arboreum Atropurpureum Good For?

This is an unusual shrubby succulent that would look great in a warm, sunny place in your home. The black, fleshy-leaved rosettes form a spectacular architectural show at the extremities of the branching, woody stems.

This sensitive evergreen requires temperatures above 5 degrees Celsius (41 degrees Fahrenheit) to survive, although it can be moved on the patio during the summer months.

Aeonium arboreum ‘Atropurpureum’ is an enthralling plant with an exotic (and almost prehistoric) appearance – ideal for creating a striking focal point! 90cm in height ” (36″). 60cm spread ” (24″).

The beautiful Aeonium arboreum Atropurpureum has many uses, such as in home and office decor, as a border plant, and for ground cover. The rich maroon color is good for cutting flowers.

Many people like growing Aeonium plants in that it requires little care. This succulent ground cover will grow well even without being fertilized too often, so it’s a good choice for someone who doesn’t want to deal with the maintenance of high-maintenance plants.

How Do You Propagate Aeonium Arboreum Atropurpureum?

Cuttings of the branching Aeonium atropurpureum can be used to propagate it. Cut off 3 to 4 cm long shoots at the start of the growing season, let them dry for two to three days, then plant the cuttings in moistened succulent soil.

It is possible to soak the cuttings in a rooting hormone prior to planting for faster rooting, although this is not required. The newly inserted Aeonium atropurpureum cuttings should be put in a bright but not entirely sunny location until successful rooted and watered just enough to keep the soil moist.

The first roots should have appeared after three to four weeks. After around 6 weeks, the young plants can be placed in a partially to fully sunny setting and cared for as full-grown specimens.

Aeonium atropurpureum can also be propagated by its leaves. Leaf cuttings are obtained by plunging or cutting a single leaf as deeply as possible from the rosette.

A totally new plant sprouts from a leaf clipping. If it is less than one centimeter in size, it can be placed in a succulent substrate. The young plant should not be exposed to the hot noon sun until the next summer.

When Do You Prune Aeonium Arboreum Atropurpureum?

Aeonium ‘Atropurpureum’ is a slow-growing, hardy succulent with beautiful and unusual purple foliage. It needs abundant sunlight and must be kept free of frost.

The leaves should be pruned back in late summer, removing any dead leaf matter, or winter cleanup can be done by simply leaving the leaves intact: it will not harm the plant.

Remove any dead or diseased leaves before new growth starts in spring. Doing so will encourage new growth without damaging the plant. If the plant becomes leggy and straggly with age, it can be trimmed back to about half its size in early spring.

When Do You Repot Aeonium Arboreum Atropurpureum?

The Aeonium arboreum Atropurpureum plant is slow growing, so it doesn’t need repotting often. Repotting this plant can be done in the spring or after the flowering season. Before repotting, you need to check if the current container is still in good condition.

If a piece of trunk is showing through the drainage holes or if the pot feels too heavy for you to lift, you will probably need to replace your container with a fresh one.

You can repot aeonium arboreum Atropurpureum in spring or in autumn, but the soil must be dry before repotting. This succulent can take quite a lot of space, so you should repot it as soon as it outgrows the old container.

How to repot:

  • Remove the plant from its old pot. If it is root-bound, gently tease the roots apart with your fingers or cut off any that are circling the inside of the container.
  • Spread a thin layer of soil mix over the drainage holes in the bottom of your new container, then place your plant on top and fill in around it with more soil mix.
  • Water the plant well, using enough water to soak the soil mix.
  • Place the plant in its new pot, cover the roots with soil mix, then water it again. Don’t overwater.
  • Place the pot in a bright place in your garden or indoors where it will receive at least six hours of sunlight daily.

What Potting Mix Do You Use For Aeonium Arboreum Atropurpureum?

A substrate mixture of nutrient-deficient soil and mineral components is appropriate for Aeonium atropurpureum. A succulent substrate should be water permeable, so that no water accumulates after watering.

This can be accomplished by combining 60% succulent soil (also known as cactus soil) and 40% mineral components, such as gravel or perlite, lava rocks, and some quartz sand.

The open-pored mineral components, perlites, and granules help the substrate’s airflow. They store nutrients and moisture while allowing excess water to flow quickly after watering.

The soil in which you plant Aeonium arboreum Atropurpureum should be well-draining while retaining some moisture in the ground. To achieve this unique balance, use equal parts loamy and sandy soil in your potting mix.

The loamy soil will provide your plant with the nutrients it requires, while the sand will guarantee that it drains fast. On the other hand, you should add peat moss to the mix to assist it retain the moisture required to keep the plant alive.

Is Aeonium Arboreum Atropurpureum Evergreen?

‘Atropurpureum’ is a 1.5m loose evergreen subshrub with deep red-purple leaves and conical panicles of little yellow flowers in late spring.

Aeonium arboreum ‘Atropurpureum’ is also known as the dark purple houseleek tree. With age, this plant develops a tall, woody stem and typically generates side shoots.

The leaves are meaty and vibrantly colored. In perfect conditions, this plant can grow to a height of up to 1.5m. The leaves forms geometric rosettes, and when combined with the stem, these plants may be quite striking.

Similar Posts