How Do You Take Care Of Pilea Mollis?

How Do You Take Care Of Pilea Mollis?

Moon valley pilea is sometimes referred to as a friendship plant. Simply cut it and share it with friends and family to help it flourish. It basically means that you and the plant can grow your friendship together. Here are the guidelines

Light: Pilea mollis thrives in a bright, indirect sunlight location in your home. Despite the fact that this plant is part of the succulent family, do not place it in direct sunlight since this will scorch the leaves.

Because it grows towards the sun, rotate your plant at least 2-3 times every week to keep it from becoming lopsided. This plant can grow in low-light conditions; however, the leaves will turn a darker green and the plant will spread out more.

Temperature: Normal residential temperatures range from 65 to 75 degrees Fahrenheit (15 to 23 degrees Celsius). However, avoid placing your Pilea near heating vents in the winter, since it will drop its leaves.

In the winter, they should not be exposed to temperatures below 50°F (10°C). It is better to grow the plant indoors because even a mild cold will kill it.

Soil: Peat moss or African violet potting mix.

Water: One of the reasons that ‘Moon Valley’ is an easy-care plant is that it does not require a lot of water. It does not, however, thrive in dry soil.

Growing it on slightly moist soil, leaving the top inch to dry before watering your plant again, is a good medium for best growth. It will not thrive in wet soils, so use a well-draining potting mix.

Humidity: ‘Moon Valley’ plants tolerate high humidity well, making them an excellent choice for terrariums or a mixed grouping of houseplants with comparable cultural requirements. Houseplants will benefit from the increased humidity of their close quarters if they are grouped together.

Fertilizer: Feed once a month in spring and summer with a water-soluble fertilizer that has been diluted by half (such as 10-10-10)

How do you propagate pilea Mollis?

Pilea mollis is extremely easy to propagate by cuttings because it can produce roots and plantlets from practically any portion of the plant!

The simplest method is to take a leaf (with the petiole attached) from the mother plant, let the end dry up for a day or two, then place it in a small glass of water and wait! Keep the water clean and make sure the leaf doesn’t dry out, and you should see fresh growth in 1-2 months.

How big do Pilea Mollis get?

Moon valley pilea can grow to double its size in a short period of time if given the right living conditions. To ensure that your plant receives the nutrients it need and grows to its full potential, fertilize it on a regular basis during the blooming season.

The leaves will reach a length of around two inches. The plant itself will remain small, never growing taller than 12 inches, making it ideal for windowsills and tabletops. It does not require much sunshine to survive, but it does enjoy humid settings.

Where is pilea Mollis native to?

The Moon Valley Pilea, also known as Pilea Mollis, is indigenous to Central and South America. Moon Valley Pilea gets its common name from its deeply dimpled leaves, which are supposed to resemble the craters and valleys on the moon.

In nature, the leaves are bushy and bright yellow-green with dark copper veins. The leaves will reach a length of around two inches.

The plant itself will remain small, never growing taller than 12 inches, making it ideal for windowsills and tabletops. It does not require much sunshine to survive, but it does enjoy humid settings.

When do you repot Pilea Mollis?

Repotting should ideally be done in early to mid-spring, when the plant may recover more quickly from the shock of rehoming.

Because Pilea ‘Moon Valley’ plants have shallow roots, repotting may only be necessary every couple of years. You’ll know it’s time to repot your moon valley when:

  • Roots protrude from the pot’s drainage holes/appear in the dirt.
  • It requires more water than usual.
  • The existing soil no longer drains as swiftly as it formerly did.

Why is my Pilea Mollis Brown?

When the Moon Valley pilea does not receive enough moisture, it becomes brown. Their leaves begin to turn brown and lose their hue. Make care to keep your plant in a humid environment and to water it frequently.

Common problems with moon valley plants include crisp falling leaves caused by underwatering, brown leaf tips and yellow lesions or “halos” on the foliage produced by low humidity levels, and excessively yellowing leaves or stunted development caused by root rot induced by soggy soil.

Prevent these common foliar problems by using a well-draining soil media including perlite to stimulate soil circulation, watering only when the topsoil dries up, and increasing humidity as needed with misting and humidifiers.

Are Pilea Mollis poisonous to cats?

Valley of the Moon Pilea is a non-toxic houseplant that is safe for both pets and humans.

If the leaves are consumed in large numbers, nausea and vomiting have been reported, so keep the plant out of reach of small children and consider spraying the bottom leaves with lemon juice or a similarly bitter repellant if you have particularly interested pets nearby.

Is Pilea Mollis the same as friendship plant?

According to the Missouri Botanical Garden, Pilea mollis ‘Moon Valley’ is sometimes sold under the label “friendship plant” because both plants share the cultivar name ‘Moon Valley’ due to their similar appearance.

The friendship plant, on the other hand, is a distinct variety known as Pilea involucrata, which is significantly smaller at 8 inches tall on average and has a less upright growth pattern than Pilea mollis.

The Pilea mollis is distinguished by its softer leaf texture, with mollis meaning “cover of soft hairs” in Latin.

The name “friendship plant” refers to the ease with which Pilea involucrata can be propagated and shared among plant gardeners, and it can be used to both Pilea kinds in this situation.

How do you repot pilea Mollis?

The finest containers for your moon valley pilea are pots with efficient drainage systems. It may die if the roots become entangled in too much water.

Make sure the pot has open drainage holes to help drain excess water once the soil is moist. When your plant has grown larger than its original size, repot it into a larger container with more room for the plant and its roots.

If you keep the plant in a smaller container, the roots will become tangled and will not receive an equal amount of nutrients from the water and soil.

How do you prune Pilea Mollis?

When stems on your moon valley plant become leggy, squeeze them with your thumb and forefinger or cut them just above a leaf node with clean, sharp scissors to remove stem length.

Pileas tend to stretch in low-light environments, so keep them in brighter sunlight or use grow lights, such as these full-spectrum lights, in darker homes to avoid leggy stems.

Why is my pilea Mollis drooping?

Drooping foliage is usually a sign of overwatering and potentially too much direct sunlight exposure.

Check to see whether the top two inches of soil are too wet or soggy, and reduce watering until it dries out.

If drooping persists, root rot may have developed; thus, inspect the root system for dark, mushy patches and cut out any rotting pieces with a sharp, sterile knife.

Before repotting in new soil, wash the root ball and sprinkle it with a natural fungicide, such as this copper fungus treatment.

Is pilea Mollis easy to care for?

The Pilea is easy to maintain, just keep the plant in indirect light or in a shaded area.

The plant loves moisture and humidity, so be sure to water the plant thoroughly and mist it daily to keep it hydrated and happy.

Growing and caring for moon valley pilea is not a tough undertaking. It is relatively simple to grow. If you water it once a week on schedule, keep the humidity around 50%, and fertilize it on a regular basis (approximately once a month), you can enjoy trouble-free blooms throughout the season.

Should i mist pilea Mollis?

Moon valleys will benefit from occasional to regular misting, the frequency of which will be determined by the consistency of humidity in your environment.

In ordinary home temperatures (65-75oF) and the absence of a humidifier, for example, misting 2-3 times per week is advised to maintain high humidity.

If you’re a forgetful plant owner, your moon valley plant can survive weekly misting, but it’s better to augment this with a reliable supply of air moisture, such as a humidifier or humidity pebble tray, to avoid stress-induced foliage loss and poor development.

How often do you water Pilea Mollis?

Place the plant in a pot with a good drainage system. Water the plant if the upper layer of soil appears to be getting too dry, but make sure to let the water drain fully so that it does not accumulate at the plant’s base.

The Moon Valley like damp soil, but it should not be excessively wet, as this might cause the plant’s roots to rot and die.

To ensure that the soil is just how moon valley pilea loves it, you must maintain a balance between keeping it moist and dry; otherwise, too much or too little water may cause your plant to wilt sooner than planned.

Many people feel that not providing enough water to plants is the main water-related issue, but they should be aware that overwatering the plant can be just as destructive, if not more, to its health.

Should i remove Pilea Mollis babies?

Pilea plantlet babies, sometimes known as “pups,” can be removed to promote tidier, bushier growth or for propagation.

Otherwise, you can let them grow normally. Pilea babies are offshoots that sprout from the parent plant’s rhizome (root structure) and appear on top of the soil.

To guarantee that each Pilea young shoot is strong enough to survive transplanting, wait until it is at least 2 inches tall before removing it.

Harvest Pilea babies during the spring-fall growing season to capture them when they are still in active growth, and remove them by snipping each one at the base of its stem with clean, sharp kitchen scissors.

Similar Posts