/ / How Do You Take Care Of The Lady In The Red Fern?
Fern Plant

How Do You Take Care Of The Lady In The Red Fern?

How do you take care of the lady in the red fern?

Lady in Red grows significantly smaller than other types, with finely textured light green foliage supported on dramatically contrasted red-violet stems.

In the shade or woodland garden, combine with bold-leaved plants like hostas and brilliantly colored heucheras. A perennial herbaceous plant.

Soil should be organically rich and well-drained. Water periodically to keep the soil evenly moist; tolerates drier soils once established, but prefers steady moisture.

During the growing season, use a general-purpose fertilizer on a regular basis. After new growth emerges in the spring, prune back old fronds.

Does Lady in Red Fern spread?

This plant can grow to be 30 – 36 inches tall and spread up to 24 inches wide. Plant up to 24 inches apart in large plantings.

Lady in Red Fern’s beauty will have you singing to your shade garden. Lady in Red Fern (Athyrium filix-forma) is grown for its typically ferny foliage and distinctively red stems.

This perennial foliage plant will look lush and vibrant green in your shade or part shade garden, and it may also be planted indoors as a houseplant!

Is Lady fern the same as Lady in Red fern?

The specific epithet is derived from the Latin words filix, which means fern, and femina, which means woman, as seen by the common name lady fern.

‘Lady in Red’ is a cultivar with elliptic lacy light green fronds and contrasting burgundy-red stipes that grows slightly smaller (18-30″ tall). Athyrium angustum f. rubellum ‘Lady in Red’ is a synonym.

Lady in Red grows significantly smaller than other types, with finely textured light green foliage supported on dramatically contrasted red-violet stems.

How do you identify Lady in Red fern?

The lady fern, Athyrium filix-femina, is a deciduous fern with lacy-cut, upright or ascending, 2 to 3-pinnate or pinnatifid, finely-divided, lanceolate, light green fronds that grow in a dense round shuttlecock-like clump to 2-3′ tall.

Each frond (leaf) bears twenty to thirty pairs of elliptic non-opposite pinna (leaflets) with narrow pointy points on each frond (leaf). Each pinna is divided into lanceolate to oblong pinnules that are deeply sliced (subleaflets). On the undersides of the pinnules, sori and indusia can be discovered.

This species is widespread throughout northern North America, Europe, and Asia in rich moist woodlands, thickets, fields, meadows, and ravines.

Is Lady in Red fern a perennial?

Lady in Red has finely textured light green leaves held on dramatically contrasted red-violet stalks and grows significantly smaller than other types.

Combine with bold-leaved plants in the shade or forest garden, such as hostas and brilliantly colored heucheras. This plant is a herbaceous perennial.

Is Lady in Red fern Native?

Lady in Red Fern is a low-growing, shade-loving, moisture-loving plant native to North America. Use this plant in garden borders, to add foliage interest to pots, or as a potted houseplant to your indoor jungle. Lady in Red Fern is a rabbit-resistant plant that is easy to grow.

How tall does Lady in Red fern grow?

The lady fern, Athyrium filix-femina, is a deciduous fern with lacy-cut, upright or ascending, 2 to 3-pinnate or pinnatifid, finely-divided, lanceolate, light green fronds that grow in a dense round shuttlecock-like clump to 2-3′ tall.

Each frond (leaf) bears twenty to thirty pairs of elliptic non-opposite pinna (leaflets) with narrow pointy points on each frond (leaf).

This plant can grow to be 30 – 36 inches tall and spread up to 24 inches wide. Plant up to 24 inches apart in large plantings.

Where can I buy the lady in the red fern?

If you’re interested in growing lady in the red fern, but don’t have the space for a garden, consider buying lady in red fern plants from a reputable online nursery or garden center.

The lady fern, Athyrium filix-femina, is a deciduous fern with lacy-cut, upright or ascending, 2 to 3-pinnate or pinnatifid, finely-divided, lanceolate, light green fronds that grow in a dense round shuttlecock-like clump to 2-3′ tall.

Can lady in red fern be grown indoors?

The lady fern, Athyrium filix-femina, is a deciduous fern with lacy-cut, upright or ascending, 2 to 3-pinnate or pinnatifid, finely-divided, lanceolate, light green fronds that grow in a dense round shuttlecock-like clump to 2-3′ tall.

This plant is suited to indoor pot culture and may also be grown in a sunny window box.

Lady in red is a small variety of lady fern. It gets its name from the burgundy stems that contrast beautifully with the light green fern fronds. Lady in red is dwarf variety that grows to a height of only 18 to 30 inches tall, making it a good choice for smaller spaces such as rock gardens and woodland beds.

Lady in Red Fern (Athyrium filix-forma) is grown for its typically ferny foliage and distinctively red stems.

Is Lady in Red fern Evergreen?

This plant is semi-Evergreen

Lady in Red Fern’s beauty will have you singing to your shade garden. Lady in Red Fern (Athyrium filix-forma) is grown for its typically ferny foliage and distinctively red stems. This perennial foliage plant will look lush and vibrant green in your shade or part shade garden, and it may also be planted indoors as a houseplant!

How do you prune the Lady in Red fern?

Pinching back the new growth from the Lady in Red Fern is fine, but don’t remove more than a third of it. This fern can be fairly low maintenance, as it will re-seed; and should be cut back as new growth emerges in spring.

New leaves on an Athyrium filix-femina should grow to about 2 1/2 inches long. After that, they will be pinnae (the divisions of the leaf), which are about 1/4 inch long, and gradually decrease in size thereafter.

How often do you water Lady in Red fern?

Lady in Red Fern is best watered when established to ensure the roots don’t dry out. If the soil is almost dry, it’s time to water. As a general rule, newly purchased plants should be allowed to dry out slightly between waterings during their first growing season or two.

After that, give them a good soaking about once a week if they don’t appear to be drying out. Lady in Red Ferns grow well in areas with partial shade and moist soils, as long as they are not soggy and drain well.

At least 60% shade is necessary for survival of this species.

Water the Lady fern, as a general rule, water only when the top 1/3 of the soil is dry to the touch. Repeat these instructions in each growing season as needed.

How often do you fertilize Lady in Red fern?

Lady in Red Ferns are low maintenance when it comes to fertilizing. In the spring, apply a general fertilizer that has a ratio of 2-10-20, according to the amount of phosphorus.

Fertilize Lady in Red Fern (Athyrium filix-femina) monthly during the growing season with a slow release (13-15 day) or liquid fertilizer diluted by half.

Fertilizing lady fern once every four weeks with a water-soluble fertilizer is recommended to help your plant grow and stay healthy.

Is Lady in Red fern poisonous?

Lady in Red Fern is not poisonous! Use of pesticides on lady ferns is not recommended as it affects negatively on their ability to reproduce and grow.

Lady Fern is generally thought to be non-toxic. It is a popular food source for wildlife such as Roosevelt elk, grizzly bears, and deer.

What is lady in red fern good for?

It is an excellent choice for a gloomy region of the landscape that requires a small yet easy-to-grow fern. Rock gardens, woodland gardens, covered border fronts, and shade gardens are all options. Also useful in shady locations near streams or ponds.

Easily cultivated in part shade to full shade on rich, medium moisture, well-drained soil. It is more tolerant of dry soils than many other ferns.

Will endure full light, but only if the soil is kept moist at all times. Shelter from the wind to keep the fronds from breaking. Every few years, divide clumps in the spring to realign crowns at the soil level.

Can Lady in Red Fern be grown outside?

Yes, lady in red fern can be grown outside.

It can be grown in most regions, but it is suggested to give it the best chance of survival by using a geographical design that will keep the plant from getting too hot during the summer and too cold during winter.

Lady In Red Fern is suitable for USDA hardiness zones 4-10. It grows best in open, moist woodlands and dense shade at high elevations on a rocky soil with plenty of air circulation.

How can I propagate Lady in Red Fern?

Lady in red fern is propagated by division. The best technique to reproduce your lady fern is to divide the rhizomes. This is simple to accomplish in the spring.

  • Gently dig around your fern in a circle with a garden fork or shovel to dislodge the rhizomes and roots.
  • Remove your fern from the ground and carefully shake away extra dirt to reveal the rhizomes.
  • Divide the rhizomes with your hands or a sharp knife, making sure each section has healthy foliage.
  • Add compost or other organic material to the soil before planting your young ferns in a shady, well-draining location.
  • Maintain a wet but not damp soil.

How to grow Lady in Red fern from seeds?

Lady in red fern can easily be grown from seeds. Put the seeds on a wet paper towel, fold it and put it in a plastic bag for about 10 days. Then plant into pots with a commercial compost and water them lightly, keeping them at room temperature until the seedlings appear.

Lady in red fern can be planted from containers as well as seeds. Plant the ferns in an area with partial shade to full shade and kept moist all year round.

Plant the lady ferns about 1/3 inch deep into a well-drained soil such as a bark or stone mixture with equal parts of peat moss added.

Similar Posts