How often do I need to repot my Ficus Pumila?
If your Ficus Pumila is planted in a container, you will need to repot it every 3 years. You will know when it is time, because the potting mix around the roots will have compacted. When the plant outgrows its current container, remove it and check underneath to see if there is enough room for new root growth beneath the root ball.
You should also check to see if the leaves are touching any surface as this can cause stress and ill health. The roots of Ficus pumila love to grow where they can get light, water and air. This plant prefers to be kept in areas with poor drainage for the roots, especially at locations where the soil is likely to become wet.
Ficus Pumila should not be placed near water bodies as it will drown. It should not be overwatered. Ficus pumila should not be kept moist at all times, as this will cause root rot. A proper planting mix should be used when repotting ficus figs or any other bonsai for that matter. Potting soil should be used for the containers.
Where are Ficus pumila plants found?
Ficus pumila is native to Japan, where it is located in both the mountains and the coastal regions. This plant prefers to grow in conditions that are moist, warm and well-lit.
In regions such as the United States, the fig ivy (Ficus pumila) can be kept outdoors when temperatures permit or indoors if temperatures remain high enough.
Ficus pumila is known by the common names of climbing fig, creeping fig, Japanese ivy and Japanese climbing ficus. It is a member of the Ficus Family. Ficus pumila are an evergreen plant with a trunk diameter which can reach up to six feet in height or more.
They grow rapidly and produce beautiful heart-shaped leaves. It can be used as a houseplant or as a bonsai tree indoor or outdoor with the proper care. The hardiness of the bonsai tree is around 10–30 degree Fahrenheit.
Ficus pumila can be propagated by cuttings. The bonsai cultivators prefer to use cuttings because it helps them to propagate a particular variety of this plant at one time. The cuttings are taken from the parent plant and placed in a rooting medium such as sand and water is added on the top of this mixture.
Can you grow ficus pumila from cuttings?
Ficus Pumila plants can be propagated both by seeds and cuttings. These plants are widely used as indoor plants and are known for their hardiness.
Cuttings of Ficus Pumila can be planted in a mixture of sand, soil or even water. In order to root Ficus pumila, a warm and humid environment is needed with indirect sunlight. The best time to take a cutting is in the spring or fall season when the plant is active.
Fill a glass halfway with purified water and submerge the cutting, wrapped side down. Because ficus pumila roots so effectively, no rooting hormone is required. However, if you wish to speed up the rooting process, soak the incision in rooting hormone before immersing the cutting in water.
Place the wrapped cutting in an area that provides indirect sunlight and mist it daily. When roots appear, pot the cutting and continue to water it until it is established.
After the Ficus pumila has rooted, remove its cutting from the glass container. It may not be necessary for you to transplant your new ficus pumila bonsai tree to a container, because it is possible for this plant to grow directly in your garden soil outdoors.
Can you root Ficus Pumila in water?
It is really simple to propagate Ficus Pumila in water. Even if you’re just getting started with propagation. We prefer to remove a section of stem approximately 10cm (4in) long for a water cutting. It makes no difference whether section of the stem you take; it all works.
Simply remove a branch and if you have a rooting hormone, apply this 5mm (1/5in) from the end of the cutting, then place into water. We can use any type of receptacle, including cups and we can even use rock wool cubes if required.
Ficus Pumila will prosper in any container, as long as the soil is compatible with its needs. To ensure that your cutting is successful and ready to be transplanted, it is a good idea to cut it from an existing plant rather than from a shoot or tip.
This ensures that there are no problems with branching or root development. You may also want to keep the cutting in a warm, humid environment for approximately 2 weeks.
Ficus Pumila will be in good shape from the start and will develop good root systems. In some cases, the leaves may turn a yellow color and fall but this is often not the case. After about 2 weeks, you can transplant your new ficus pumila into soil or keep it in water.
How close to wall should I plant Ficus Pumila?
Only one Ficus Pumila plant is required for indoor pots or a small outdoor garden. This quick-growing vine needs at least 10 feet of vertical clearance and 3 feet of horizontal room. Indoors, the plant is typically grown on a trellis to embellish a side wall in a living room or corridor.
Ficus Pumila will send out aerial roots that grow down the wall and attach themselves firmly to it. Indoors, this plant can be grown in a hanging basket, also to give an attractive look. When training Ficus Pumila indoors, wrap the vine around the trellis or stake it between holes drilled in bamboo poles.
As well as being used indoors as a decorative plant with vertical walls, to grow Ficus pumila bonsai outdoors requires at least 6 feet of vertical clearance and 3 feet of horizontal space. To make a bonsai tree, wrap a length of bamboo around a stake planted in the ground, or drive it into the soil about 6 inches deep.
Ficus pumila’s roots will explore the new environment and grow down the stem towards the ground. Bonsai growers then cut the stem(s) to produce a vertical trunk.
Once established, indoor Ficus Pumila will require no pruning at all, while outdoor versions should be pruned regularly.
In spring, cut back the roots and stems to about 10 inches long and then allow them to re-root. About every 6 months or so you will need to chop off large branches that have begun to grow in the wrong direction.
Is Ficus Pumila slow growing?
Ficus Pumila (Creeping fig) is a popular ground cover and vine for walls and fences due to its rapid growth rate. It will grow, climb or trail to form a dense cover. Ficus Pumila can be grown indoors as a houseplant in clusters on a decorative trellis or archway, with the stems allowed to cascade freely.
The plant has little need for maintenance and is capable of withstanding neglect. It is an excellent choice for beginners due to its simplicity and ease of propagation.
It is a hardy evergreen plant which makes it ideal for outdoor use in the colder months of fall and spring. Ficus Pumila will grow in shade and very little water is required to keep it healthy. Just give it some space, with plenty of sun and lots of room for free growing.
For a bonsai, use the vertical growth pattern of this plant to start a new bonsai from cuttings. Use a container that will allow the vine to climb up, but not out over the edge before it continues to root. This is usually best done during late spring and summer months.
The ideal light is lots of indirect sunlight, but partial shade is fine. Ficus Pumila prefers a temperature between 65 and 80 degrees Fahrenheit (18-27 degrees Celsius). The plant appreciates some humidity, but it can tolerate dry environments as well.
Ficus pumila bonsai trees are not very hard to maintain. It does well under normal indoor conditions, provided that it receives bright light and sufficient moisture.
Does Ficus Pumila need a trellis?
Ficus Pumila (Creeping fig), a lovely climber with tiny, heart-shaped leaves, may conceal ugly cement, stucco, or brick buildings. It does not require wires or a trellis since it climbs via aerial roots. It should not be used on wood walls, as its sticky tendrils might harm them.
Ficus Pumila is normally trained up walls to create a bonsai. To achieve this, the plant must be pruned in early spring. If you want to train it along a wall, use an old bamboo stick or similar object that is long enough for the root zone of the climbing vine to be stable there.
Make sure that the sticks supporting the aerial roots are not very long and that there is plenty of room for roots between them and the wall.
Most of the aerial roots will be found on the lower part of the stem. Therefore, you have to allow sufficient space between the sticks and the wall. The distance between supports should be about one and a half times the length of the aerial root zone.
This is a slow growing plant and will take at least 6 months after planting in order to form its full root system that it can use over many years. Ficus Pumila is quite drought-resistant and it prefers organic, well-drained soil with an acidic pH.
It tolerates dry, sunny conditions, but does not tolerate wet or cold soil. Ficus Pumila can also be grown outdoors in pots. In this case, it is necessary to provide adequate drainage and shelter. It will require a permanent drinking source such as water or a drip system.