Is Sansevieria Pinguicula A Snake Plant?

Is Sansevieria Pinguicula a snake plant?

Walking Sansevieria Pinguicula, a rare snake succulent cactus 4″ pot plant. Sansevieria Pinguicula has thick, long leaves between 15cm and 30cm (6in to 12in) in length that are dark green and pointed. These suckers will slowly grow and grow back where each leaf has been cut off.

The leaves that Sansevieria Pinguicula produces are very sharp, so you should ensure that you keep them far from children, but they are ultimately harmless to the touch. This species is highly regarded as a houseplant because of its unusual leaves.

Because the leaves are both airy and durable, they are likely to survive worries about climate change and will still be suitable for indoor use even if the heat rises. Its leaves can also be cut off after flowering to keep your plant fresh and aromatic. The Sansevieria Pinguicula is a lesser known succulent plant endemic to Kenya. Its leaves are thick and pointed.

Is Sansevieria Pinguicula safe for cats?

As a result, the American Society for the Prevention of Cruelty to Animals, or ASPCA, has classified Sansevieria as a hazardous plant to cats and dogs. Sansevieria Pinguicula is a plant that is best kept out of reach of pets.

Sansevieria Pinguicula is not a very dangerous plant for most animals, but it is best to keep all plants out of reach, especially if you have pets. This includes your cat as well.

Sansevieria Pinguicula contains a chemical called saponins that makes the tissue surrounding these leaves toxic to cats. The leaves are said to induce vomiting or diarrhea in cats and are even more dangerous when chewed or eaten.

Sansevieria Pinguicula is part of the Asparagaceae family, which contains the genus Sansevieria that is known to be poisonous to cats. If you have a cat or small dog, it is best to keep your Sansevieria Pinguicula away from them.

Sansevieria Pinguicula are part of the genus that contains species that can be toxic to animals. The sap in these plants ranges from mildly irritating to poisonous for many animals and humans.

How do you propagate Sansevieria Pinguicula?

Sansevieria Pinguicula is a rather easy species to propagate. The majority of closely related species seldom reproduce, and commercial species such as Dracaena Trifasciata are often propagated by micro propagation.

However, because of the poor growth rate of D. Pinguicula, micro propagation is not economically viable. As a result, vegetative growth by division or leaf cutting is favored.

Propagation by division

This is accomplished by detaching and rooting the plantlets formed at the stolon’s end. Due to the fact that plantlets establish a rosette of leaves prior to initiating root growth, it is critical that plantlets are not removed before they have developed stilt roots to a length of at least 3 cm.

If the plantlet is removed too soon, it will lack the energy and water reserves necessary to develop roots and would die.

However, after the stilt roots reach a suitable length, the stolon can be severed at any point and the new plant planted in somewhat damp porous soil.

A plantlet can take anywhere from a few weeks to nearly a year to produce new roots, and may take much longer to grow fine roots and establish itself, depending on the environment.

Division is the favored technique of propagation for the majority of specimens, especially variegated examples, as leaf cuttings generally do not retain the variegation.

Propagation by leaf cutting

Leaf cutting is often employed after rosettes have bloomed and have ceased to develop. Cut the rosette into whole leaves and lay away for several days to allow the cut to dry.

At this time, the cut-side down leaf can be put into a moist porous potting media to root. The cut leaf will eventually generate roots and a stolon that will yield a new plant at its tip.

Due to the amount of leaves that can be planted concurrently, and the fact that variegation is caused by infrequent somatic mutations in the apical meristem, this is the ideal approach for creating variegated specimens.

What is Sansevieria Pinguicula?

Dracaena Pinguicula, sometimes known as the wandering Sansevieria, is a xerophytic CAM succulent endemic to the Bura region of Kenya, near Garissa. Peter René Oscar Bally described the species in 1943.

Dracaena Pinguicula is a very sluggish grower that prefers warm weather. As a result, it is uncommon in cultivation. Variegated specimens are highly sought after yet are extremely uncommon and command a premium price.

Although normal specimens are more plentiful, they are nevertheless highly sought for because to their unusual growth pattern. D. Pinguicula, like the majority of xerophytic plants, thrives on porous, well-drained soil under cultivation.

Excessive watering will result in the rot of the fleshy roots, thus it is important to allow the soil to dry properly between watering.

Many gardeners choose a coarse potting mix made from both inorganic and organic materials. Gravel, perlite, vermiculite, and decomposed granite are frequently added to increase weight and drainage, while bark chips and coconut coir or husks are used to retain moisture.

While this porous mixture will prevent overwatering and give adequate aeration, it will require more regular watering to avoid over drying.

How do you identify Sansevieria Pinguicula?

Sansevieria Pinguicula is a low-growing, hairless or sparsely hairy succulent that bears long wiry green to grayish-green leaves and radiant yellow flowers. The plants vary in size from about tall. The leaves are long, club-shaped, and with a central stem up to as much as in diameter. The foliage is erect and can be slightly tough. The following are features of Sansevieria Pinguicula;


Dracaena Pinguicula is a small, erect plant that looks like a little agave. It is well recognized for its growth habit: unlike most similar species, this species generates aerial stolons that culminate in new plantlets. These subsequently develop stilt-like roots that stretch downward to the earth, giving the appearance of a plant wandering away from its parent.


  1. Pinguicula’s blue-green leaves have a thick waxy cuticle and the deepest stomata of any former Sansevieria species. In cross section, the leaves are grouped in a rosette and are lunate in shape. The leaves range in length from 12–30 cm, are 2.8–3.5 cm thick, and have a single sharp spine at the apex. Each leaf is entirely covered with a broad channel with reddish-brown edges and a stiff, papery white cuticle.

When water is abundant, the underside of each leaf appears smooth, but develops deep longitudinal grooves when the plant draws on the water stored in its leaves, allowing it to live in one of Kenya’s most parched locations.


A juvenile plantlet is held above the surface by stilt-like roots. To the right, the stolon is visible. D. Pinguicula is distinguished by its thick stilt-like roots. Each rosette develops numerous of these roots, which are several inches in diameter and coated in a thick brown cuticle.

Underground, fine roots are generated and are important for nutrition and water absorption. The fine roots die during the dry season, and the plant enters dormancy. However, the plant’s thick succulent roots survive, and once the rainy season approaches and the roots recover, the plant will restart growing.


Flowers are borne in clusters of 5–6 on a 15–32 cm long upright branching panicle. Small, brownish, bottle-shaped flower bracts with white anthers and stamens. Fertilized blooms produce globular berries, however only a small percentage of these berries develop to generate seed.

After blossoming, the flower spike emerges from the apical meristem, and the rosette ceases to grow. The rosette, on the other hand, does not die after flowering, but instead produces many stolons containing new plantlets.

Is Sansevieria Pinguicula invasive?

  1. Pinguicula only spreads when its plantlets are carried by the wind or by other animals. If an animal comes into contact with a plantlet and carries it to a new location, it may successfully take root and grow into a new plant in that location.

Currently, no viable means of vegetative propagation have been discovered for D. Pinguicula, but scientists are hopeful that buds buried in the leaves may one day be standard for nearly all Sansevieria species.

Sansevieria Pinguicula is a xerophyte, and as such when it is grown in the home, it should be provided with ample water for daily watering. The lack of heavy feeding will ensure that the plant does not rot from over-watering.

Other common factors that may cause problems include infestation by slugs, which can strip all of the water from a young plant within a few days.

Another problem that arises is excessive use of fertilizers or over-fertilization. It may be best to feed only once a month instead of every week, and always allow the water to dry between watering.

Environmental conditions beyond its control such as exposure to pesticides can lead to the emergence of various diseases in this species. In fact, whenever Sansevieria Pinguicula appears in nature, it is said to have thrived where pesticides were used.

When should I repot Sansevieria Pinguicula?

To maximize plant growth, you should repot your Sansevieria Pinguicula every 3–4 years, depending on the size of your plant. In addition to choosing a container that can be easily filled with water, it is important to provide adequate aeration for your plant by allowing the top soil to dry completely between watering.

If you notice that your plant has grown root rosettes on its surface, it is recommended to remove them. This will allow the plant to develop new roots more efficiently and prevent root rot. Sansevieria Pinguicula prefers a soil that allows for easy drainage and the development of aerial rootlets.

A mixture of one-third sand, one-third peat moss, and one-third perlite will be an excellent base for your plant. Developing a watering schedule and sticking to it is also important, as D. Pinguicula does not like to be over or under watered. It is important to check on your plant every day to ensure that it has the right amount of water at all times.

Similar Posts