Why My Anthurium Pendulifolium Leaves Turning Yellow?

What is Anthurium Pendulifolium?

Anthurium Pendulifolium is a big, long-leaved epiphytic aroid. When maintained outside, they may reach a height of 4 or 5 feet. And because the leaves slink downward, the plant is frequently suspended from baskets or placed on elevated platforms.

This plant thrives in low, medium, or strong light. However, if you want it to grow to be large, intense indirect light is optimal. Additionally, high humidity and a continuous warm temperature are necessary for development. Avoid excessive watering and damp soil, which are conducive to root rot.

The Anthurium Pendulifolium is an excellent air purifier and has a wonderful fragrance to boot. It is a great addition to any household, especially for those with asthma!

It also can be used as a natural pesticide or insect repellent. If you are planning on purchasing this plant, plan on spending some time in the store looking where the stock sources it from.

Is Anthurium Pendulifolium rare?

Anthurium Pendulifolium is rare. In its natural habitat (the tropical rainforests of Central and South America) it is considered endangered, due to deforestation. So, if you are a lover of nature or just want to do your part in environmental conservation, please don’t harvest this plant.

And if you would like to purchase it, make sure to do so only from a reputable establishment that is certified by the American Association of Botanic Gardens and Arboreta (ABA).

Also, be sure to keep in mind that the leaves of this plant are poisonous to cats and dogs. So if you have pets, be sure to take precautions so your pet does not chew on or otherwise come into contact with this plant.

Why my Anthurium Pendulifolium leaves turning yellow?

The Anthurium Pendulifolium plant is mostly grown outdoors. The following are reasons for yellow leaves in the plant;

Overwatering: The biggest reason why your Anthurium leaves are turning yellow is overwatering. It is important to water your plants only when they need it. Overwatering will cause the roots to rot, which in turn causes the leaves to turn yellow.

Underwatering: The second reason why your Anthurium is turning yellow is under watering. It does not need to be watered as much as some other plants.

Not enough light: The third reason why your Anthurium is turning yellow is low light. If you do not have enough light for the plant, it will not be able to grow effectively, and the leaves will turn yellow. You may also try keeping the leaf wet in water so that the leaves don’t turn yellow.

Low temperature: The fourth reason why the Anthurium leaves are turning yellow is too low temperature. The plant will not perform well without the right amount of light. So, if your plants are kept in a place that is too cold, they will not be able to grow.

Pests and Diseases: It is also possible for Anthurium leaves to turn yellow due to pests and diseases. If you notice white streaks on the leaves, or insect (like aphids) attack, or any other disease or pest issue, it is important that you get rid of it immediately.

This plant also needs to have an acidic soil to do well. If you notice your plant has some serious issues that could kill it, try treating the soil with some peat moss. It will help bring down the pH in the soil if it is too high.

Excess fertilizers: Fertilizer can also cause your Anthurium to turn yellow. The best way to prevent excess fertilizer from affecting your plant is by applying it only when the leaves start turning yellow and displaying dryness. If the foliage looks very dry, reduce the amount of fertilizer you are applying.

So if you notice any signs of problems with your plant, like yellow leaves, get rid of over watering or under watering, or not enough light or an acidic soil, have a professional treat the issue for you.

How often do you water your Anthurium Pendulifolium?

Watering your Anthurium Pendulifolium is very important. You should water your plants once a week when it starts to dry out. It is a good idea for you to use a soaker hose connected to a timer. This way, you can have the Anthurium plant watered at any time of the day that it needs it.

Also, if your plant is brown, white or yellow-colored, there might be too much water on the plant. If you see that your plant is turning white, it may mean that there is too much water on the plant. You will want to remove some of the excess water on the leaves and allow the soil to dry out a little.

The other way to tell if there is too much water on the plant is if your plant has a lot of leaves. If you realize that your plant has a lot of leaves growing, it may be because there is too much water. You will want to cut back on the amount of water that you are giving the plant so that it can allow the excess leaves to die off. In addition, you should avoid over-watering because this could cause root rot in some cases.

How do you care for Anthurium Pendulifolium?

Caring for Anthurium Pendulifolium is not a tedious job if you are brave enough. Even with minimal care, you will obtain a healthy plant. Consider the following for their acceptable circumstances and best care requirements.

Light

Anthurium Pendulifolium thrives in direct sunshine. They can, however, survive in low light, but will not blossom. They thrive under the shadow of large trees in their native zone. It is preferable to replicate their natural environment as closely as possible in your house.

Pendulifolium thrives when placed near an east-facing window. If you wish to place them on a south or west-facing window, shade them with curtains and drapes.

Watering

Generally, once a week watering is sufficient throughout the plant’s growing season. Additionally, like with the majority of indoor plants, avoid overwatering throughout the winter.

When the top 1 inch of soil seems to be dry, you can re-water the plant. If your plant is subjected to prolong periods of drought, it will grow slowly. If your plant has been completely dry for an extended period of time, you can immerse the pot in water for a few minutes and then allow it to dry completely before watering again.

Soil

Anthurium Pendulifolium prefers wet, well-draining soil. Aeration of the soil is critical for plant development. Sandy loam soil is capable of the aforementioned. It has a high capacity for water retention but also has an excellent drainage system.

You might use a slightly acidic soil with a pH of 5.5 to 6.5. Consider the following to establish the ideal combination for your convenience.

Temperature

They thrive in USDA 10 or above. It is reasonable to state that it thrives at temperatures more than 55°F (12°C). Anthurium Pendulifolium prefers temperatures between 65 and 85 degrees Fahrenheit (19 and 30 degrees Celsius). At night, the plant can withstand temperatures of 70-75°F (21-24°C).

At temperatures below 50°F (10°C), the plant is highly susceptible to death. As a result, ensure that the temperature does not go below the set point.

Humidity

Anthurium Pendulifolium prefers humidity levels of approximately 80% and thrives best in this range. You may begin by placing your plants in a high-humidity zone of your house, such as the bathroom or kitchen, purchasing a humidifier, or artificially maintaining the humidity using a pebble tray near your plant.

Fertilizer

To observe superior results, dilute the standard fertilizer to 1/4th strength and feed this plant regularly during its growing season.

The greatest thing you can do for this plant is to feed it a weekly dose of a mild liquid fertilizer.

Repotting

Consider repotting this plant if you notice evidence of rootboundness and the plant begins to grow slowly. Regularly inspect the drainage holes to determine if the roots have popped out. If the answer is positive, repot the plant.

It is suggested to replace the potting soil once a year to maintain the freshness of the soil in the plant. Repot in the spring.

Pruning

The long, graceful leaves of Anthurium Pendulifolium make it difficult to determine whether or not to cut them. Pendens may benefit from little pruning on a regular basis to maintain their appearance in check. Yellowed, damaged, or brown leaf parts should be clipped away.

Flowers often deplete the plant of nutrients. As a result, it is entirely up to you whether or not to detach them from the plant.

Propagation

You can propagate Anthurium Pendulifolium through stem cutting. When you notice a healthy stem in the plant, strip off the bottom inch of leaves and a 1-inch portion of the upper part. Dip this cut portion in rooting hormone before planting into a medium that drains well. Ensure that this medium is free from chemicals and non-organic compounds.

How do you repot Anthurium Pendulifolium?

Anthurium Pendulifolium grows slowly to moderately. And its roots take some time to fill a container. As a result, repotting is required only every 2-3 years. Additionally, you only need to repot when the plant becomes root bound. As a result, avoid repotting the plant unless absolutely necessary.

Additionally, yearly soil refreshment is an excellent habit. This will ensure that it is nutrient-dense. Simultaneously, it has excellent drainage and has not become dense or compacted. To repot the plant, follow these steps:

  • Remove the plant carefully from its container. Then, scrape away any extra dirt and soil. Untangle any roots that have become entangled.
  • Prepare the replacement pot. It should ideally be one size bigger.
  • Fill the new container halfway with fresh, well-draining potting mix.
  • Fill the leftover space in the new container with potting mix after inserting the new root ball.
  • Soil should be hydrated.

How do you propagate Anthurium Pendulifolium?

The Anthurium Pendulifolium is one of those collecting plants that all gardeners should have. That is due to its distinctive appearance. The good news is that the plant may be propagated easily and for free at home.

The two most often used methods are stem cuttings and division. Both are diametrically opposed. Thus, it is prudent to choose the appropriate strategy based on the circumstances. Spring is the greatest time to propagate the plant.

Propagation by Stem Cuttings

When it comes to propagation, stem cuttings are typically my first choice. Regrettably, not all plants can be grown this way. The good news is that Anthurium Pendulifolium stem cuttings thrive. Additionally, you may propagate in either water or soil. Here are steps to follow:

  • The critical point is to have a healthy stem cutting. Assemble each cutting such that it has at least one node and a few leaves. The cutting should ideally be at least 6 inches long.
  • Just under the stem, cut the stem. Prior to cutting, disinfect the blade of your shears.
  • Prepare a pot and fill it with well-draining soil once you have the cutting. Choose a container large enough to retain the cutting without tipping over if you happen to take a cutting with a larger leaf.
  • Plant the clipping in soil, burying the node.
  • Soil should be hydrated. Water when the soil becomes dry, but avoid overwatering.
  • Maintain a warm environment with strong indirect light for the pot.
  • Cuttings will root in around four weeks.
  • When this occurs, you may verify it by lighting the cutting and tugging on it. It should resist your tug, indicating that the roots are establishing a connection with the earth.
  • This is an additional step, but it enables you to track the roots’ development.
  • Fill a glass jar halfway with water with the clippings. Submerge the nodes in the liquid. And in approximately three weeks or so, there should be a substantial quantity of roots.
  • Once the roots reach a length of at least 2 inches, you may move the cuttings from the water to a container filled with soil mix.

Propagation by Division

Division is not the same as stem cuts. In this step, you’ll divide the root ball into two or more smaller parts. This allows for the formation of numerous tiny plants from the bigger mother plant. Division is effective if the plant has grown to an excessive size and you wish to lower its size.

Additionally, it is an excellent way of propagation if you are impatient. This is because you are not need to wait for new roots to form. Rather than that, you already have a partially established plant complete with roots, stalks, and leaves. Here’s how to divide Anthurium Pendulifolium.

  • Remove the Anthurium Pendulifolium carefully from its container.
  • Once the root ball has been removed, remove any extra soil and dirt to reveal the roots and their connections to the stems.
  • Now you may choose whether to divide the plant into two or three pieces. Each segment should ideally have sufficient roots to sustain the leaves above it. Additionally, you do not wish to obtain a segment devoid of leaves.
  • Divide the root ball into the divisions you’ve chosen. Use your hands or a sterilized knife to cut.
  • Each of these divisions should be planted in its own container with a well-draining potting mix.
  • Keep the soil wet by watering it. Ensure that the roots grow not just vertically, but also in an oblique direction.
  • At the end of six weeks, you may check whether or not each segment has rooted. If not, give it some time. Afterward, you’ll reward yourself with fresh new plants!
  • Anthurium Pendulifolium grows in tropical climate zones 7 to 10. It requires as much sunlight as you can and will continue to grow when placed outdoors in a shaded area. It can tolerate temperatures ranging between 50 and 95 degrees Fahrenheit.

Similar Posts