Does Echeveria Harmsii Go dormant?

Does Echeveria Harmsii Go dormant?

Does Echeveria Harmsii Go dormant?

This succulent, as with all other types of Echeveria, sleeps through the winter months. Your Echeveria Harmsii will enter a state of dormancy during the winter months, in which they will reduce their pace of development and make less use of the resources available to them in order to survive. 

It’s possible that your Ruby Slippers could get discolored or droopy, and its growth will be slower than it normally would be. 

Before temperatures begin to increase, you should water the plant less so as not to overwater it, and you should also refrain from repotting it. 

The plant will emerge from its dormant state and resume regular growth once temperatures begin to rise.

Is Echeveria Harmsii Hardy?

The Echeveria harmsii succulent is not exceptionally hardy when it comes to cold temperatures

Temperatures that remain below 30 degrees Fahrenheit on a frequent basis can be hazardous to the plant, even if a small frost probably won’t kill it.

If you plant succulents outside, you may have to bring them inside during periods of extremely cold weather or take other precautions to ensure that they remain healthy outside.

When cultivated indoors, Echeveria typically do not have any issues with temperatures that are too high or too low; nonetheless, it is best to avoid abrupt drafts whenever it is feasible to do so.

What Are The Leaves And Flowers Of Echeveria Harmsii Looks Like?

The leaf of an Echeveria Harmsii often grows to a length of about an inch, particularly on fully grown plants.

The leaves come together to create a little rosette, and each individual leaf is rounded, long, and curled inwards ever so slightly.

The Echeveria Harmsii leaf, in addition to being clothed in a plush velvet coat, contributes to the plant’s overall look of having a touch and feel similar to velvet. 

The name “Plush Plant” refers to the velvety, plush feel of the leaf, which is why the plant is usually referred to by that name.

In addition, the tips and edges of the leaves of the Echeveria Harmsii plant have a touch of red coloration to them. 

The red colours become more intense and can color up to half of the leaf when they are subjected to high quantities of strong light. 

Many people refer to this plant as the Red Velvet Echeveria due to the velvety feel of its leaves and the intense coloration they possess.

Why Is My Echeveria Harmsii Leaves Mushy?

It’s very simple to identify if it is the leaves of your succulent that are giving you some problems. 

If the lower part of your succulent’s leaves become soft and mushy when you touch them, then you know it’s their leaves that are overwatered.

The presence of water is the only cause of the leaves’ succulent quality. If the leaves on a plant grow more pliable, then one may reason that the plant is successfully holding some of its water.

When the leaves of a plant get soft, this is a sign that it is not receiving enough water. 

This is due to the fact that the plant cells that are normally responsible for retaining moisture do not have anything within them to keep them rigid.

As a result, individuals experience a reduction in pressure, which has an adverse effect on the healthy tissue.

Does Echeveria Harmsii Flower?

Under ideal growth conditions, the mature Echeveria Harmsii plant has the potential to produce flowers more than once throughout the course of a single year. 

The blooms emerge from a thin raceme that is around 10 centimeters (four inches) in length. At some point in the future, flower buds will emerge at the tip of this stem.

The Echeveria Harmsii plant has blooms that are a vibrant scarlet color and have the appearance of bells. The crimson petals frequently have golden borders and tips at their extremities.

In most cases, the beginning of the blossoming season coincides with the beginning of spring, when solar exposure begins to get longer.

How Often Do You Repot Echeveria Harmsii?

When selecting a container for your Ruby Slippers, you should make sure that drainage is the most important consideration.

The most ideal containers are often those crafted from porous materials such as concrete, terracotta, or ceramic.

However, members of the Echeveria family do particularly well when grown in containers made of materials that are able to hold water, such as glass or metal.

If you choose to plant your succulent in a container made of glass or metal, or one that does not have a drainage hole, you may need to pay closer attention to the amount of moisture in the soil as well as how the plant responds to being watered.

When repotting your succulents, you should always select a pot that is at least ten percent larger than the container it had been growing in before. This will ensure that the succulent has room to grow.

During the active growth season, you should only need to repot your Echeveria Harmsii once every one or two years.

How Often Should You Water Echeveria Harmsii?

Because they are able to store water for the plant to utilize in times when there is little water in the soil, the unusually shaped leaves have a meaty texture and a substantial thickness. 

As a direct consequence of this, you need to exercise caution whenever you water this plant.

If you overwater your Echeveria Harmsii, it is very likely that the plant will perish. 

In order to prevent the plant from becoming overwatered, it is preferable to allow the soil to become completely dry in between watering sessions.

The best way to water E. harmsii is to give the plant a thorough soaking but wait until the soil has completely dried up before giving it any more moisture.

This may be achieved by inspecting the soil after each and every time that you water to ensure that the soil is neither too wet nor too dry before you water again.

When the plant is actively developing, it requires only a moderate amount of water.

The Echeveria Harmsii plant, in particular when it is cultivated in colder climates, will have a reduced need for watering over the winter months.

How Can I Make Echeveria Harmsii To Flower?

There are a few things that you can do to make your Echeveria Harmsii flower. These are;

Providing Adequate Sunlight

As stated before, the Echeveria Harmsii plant needs to be placed in a location where it receives a fair amount of light; otherwise, it will not bloom. 

In order to make your Echeveria Harmsii bloom, you need to provide it with bright and diffused light.

When cultivated indoors, the Echeveria Harmsii plant should be situated in a location where it will be exposed to strong indirect light for at least six hours every day. 

Grow lights can be of assistance in ensuring that the plant receives the necessary amount of light exposure.

Add fertilizers

In order to make your plant bloom, it is imperative that you add a nourishing and enriching fertilizer to the soil every time you water. 

This is because the plant can absorb the nutrients that it needs in order to produce flowers.

Reduce Watering

When you are trying to make your Echeveria Harmsii flower, you should ensure that you reduce watering as much as possible until the plant begins to bloom. 

When growing Echeveria Harmsii indoors, the ideal watering frequency is once every two weeks; while plantation in colder climates requires even less water than this.


Pruning can be utilized to make the plant bloom. When pruning a plant, you should take care not to damage the roots. 

The point of pruning is to make the plant more compact, which may in turn encourage it to flower. 

This is because the Echeveria Harmsii plant needs to be lightly pruned in order to flower. This can be achieved by removing the dead and dying leaves that are seen near the base of the plant.

Is Echeveria Harmsii Frost Tolerant?

The Echeveria Harmsii plant is not as frost-tolerant as many other members of the genus. It is, therefore, advisable to ensure that it is grown in a location that does not experience temperatures below 50 degrees Fahrenheit.

Like all Echeverias, the Echeveria Harmsii cannot tolerate cold temperatures and will die if exposed to frost. 

Avoid leaving this succulent outside in the cold weather throughout the winter because it is a plant that does best in USDA zones 9a through 11a.

How Big Does An Echeveria Harmsii Get?

The Echeveria Harmsii is a succulent plant that has a unique leaf texture and brilliantly colored blossoms. This plant is also known for its velvety appearance.

Due to the ease with which these plush plants may be maintained, many gardeners choose to reproduce Echeveria Harmsii plants without encountering any difficulties.

Even inexperienced cultivators should have little trouble bringing these plants to full health so long as certain conditions, including a certain combination of soil substrate, water irrigation, and moderate temperatures, are met.

When it reaches its full maturity, the Echeveria Harmsii plant can reach a height of approximately 12 inches and a diameter of about the same. 

Despite its size, the plant may be notoriously sluggish to mature, with some specimens requiring anywhere from four to six years to attain their full potential.

Similar Posts