How Do You Take Care Of Alocasia Dragon Scale?

When taken care of properly, Alocasia Dragon Scale will be a great addition to any garden. However, there are a few things that need to be done in order to make sure it thrives and doesn’t run into any issues.

Light: Alocasia Dragon Scale likes indirect light. If placed in a location with direct light, the leaves will turn a pale green and won’t look as vibrant.

If too much light is present, the plant may be stressed and the new leaves will turn out to be smaller than those of its older counterparts. The older leaves might also have yellow or brown spots.

Temperature: Alocasia Dragon Scale can thrive in areas like San Francisco and Washington that have mild winters but it would be best to place it somewhere that has temperatures that range from 55-80 degrees F.

Soil: Alocasia Dragon Scale likes a thick, well-draining potting mix is required. A perlite, orchid mix, and coco coir mixture of equal parts works nicely.

Also, keep in mind that the plant can grow in either moist or well-draining soil. When fertilizing, avoid those that have high nitrogen content since this can cause the plant to bolt.

Watering: Water the plant when the top 2-3 inches of soil feel dry, water it. Overwatering should be avoided at all costs, as it is the root of many issues. If the soil starts to feel dry, it’s time to water again.

Repotting: Repotting should be avoided unless absolutely required. Extremely sensitive to disruption.

Propagation: The plant can be propagated by tuber division is the most effective way of propagating Alocasia Dragon Scale. The small tubers that grow off the main tuber can be cut into 3-4 pieces and planted in soil.

Pruning: Pruning needs is minimal. Remove any dead or damaged foliage. To limit the danger of pests or disease, remove any dead plant debris from the container. After the plant has established itself, it’s time to take care of the pruning.

Alocasia Dragon Scale forms thick rhizomes or runners and will give way to new growth if cut back or pinched back. Pinching back can be achieved by tying a pencil to a small piece of the stem and removing it to induce some growth.

Humidity: Humidity levels should be maintained at the high end of the desired range. Recommended humidity levels range from 60-80% throughout the day, but this can be achieved in different ways.

Is alocasia Dragon Scale rare?

Alocasia Dragon Scale is very rare. It is a tropical plant that does well outdoors. However, it does best within the confines of an aquarium or terrarium. Alocasia Dragon Scale will grow in a pot or planter, but it will not do well outdoors.

Alocasia Dragon Scale is a great plant, but it’s a tropical plant. It will grow best within the confines of an aquarium or terrarium. Keep in mind that alocasia Dragon Scale is a tropical plant and cannot tolerate cold weather temperatures. Alocasia Dragon Scale also works well as a specimen tree.

What kind of soil does Alocasia Dragon Scale like?

Alocasia Dragon Scale likes a moist soil, but it can do well in soil that drains well. A mixture of coco coir, perlite and orchid mix (equal parts) will work great for this plant. Avoid soils with high nitrogen content because this can lead to the plant bolting.

If it’s possible, avoid repotting altogether. Alocasia Dragon Scale is very sensitive to any sort of stress, and repotting can because it quite a bit of issue. If you must repot it, try to limit yourself to once every other year.

Is alocasia dragon scale and Silver Dragon the same?

Alocasia Silver Dragon is a magnificent plant that is harder to locate (and so rare) as an indoor plant. This plant gets its name from its silvery, textured leaves, which resemble dragon scales. The leaves, which can grow to 3 feet, are splashed with striking silver veins.

Although this plant looks similar to Alocasia Dragon Scale in some ways, it is not the same type of plant. It is a more tropical plant than Alocasia Dragon Scale and does best within the confines of an aquarium or terrarium. If you ask any indoor gardener, they will tell you that Alocasia Silver Dragon is a beautiful plant.

Alocasia Dragon Scale is a rare type of plant that people are willing to pay top dollar for. That’s because there aren’t a lot of Alocasia Dragon Scale plants out there. People who own this type of plant won’t be getting rid of it anytime soon, because they know how rare it is.

Is alocasia Dragon Scale expensive?

Alocasia Dragon Scale is very expensive. Its leaves have an enthralling vein-like structure that will take your breath away. This is why it was given the moniker dragon scale.

Despite the fact that Alocasia Dragon Scale is a highly popular and pricey species on the market, one of its uncommon species is Variegated Alocasia.

The leaves of this species are whorled, and the patterns that it has are also stunning. You can grow them as houseplants. Keep in mind that Variegated Alocasia is a slow-growing plant.

What is Alocasia Dragon Scale?

Alocasia Dragon Scale is a cultivated form of Alocasia Baginda, which is endemic to Borneo’s tropical woods. It’s one of the gorgeous “diamond” Alocasias, and unique category of rainforest specimens with stringent requirements. To acquire this plant, you’ll have to purchase it off of a specialist. Alocasia Dragon Scale is quite suitable for garden and tropical decorations.

Dwarf Variegated Alocasia Plants: Variegated Alocasia plants require a lot of sunlight, and they need to be in full sun. They also like moist soil, but do well in soil that drains well. A mixture of coco coir, perlite, orchid mix (equal parts) will work great for this plant.

How do you grow Alocasia Dragon Scale?

To grow an Alocasia Dragon Scale, you’ll have to have a tropical environment. It will thrive in USDA plant care specifications such as temperature, light, and water.

To maximize your chances of success, it’s suggested that you purchase this tropical plant from a specialist or sub-tropical nursery. This kind of nursery should be able to help you with any problems you have with the plant.

Planting: When planting Alocasia Dragon Scale seeds in outdoor environments are not recommended. They prefer the distinct heat of the tropics. Planting them in indoor environments should be fine, but it’s best to have them in a pot or planter, rather than keeping them outdoor.

Soil: Alocasia Dragon Scale has specific requirements for soil; its soil should be rich in organic matter and well-drained. Avoid soils with high concentrations of nitrogen because this can lead to the plant bolting.

Furthermore, avoid repotting altogether. Alocasia Dragon Scale is very sensitive to any sort of stress, and repotting can cause it quite a bit of issue.

Temperature and humidity: Humidity levels should be maintained at the high end of the desired range. Recommended humidity levels range from 60-80% throughout the day, but this can be achieved in different ways.

If possible, Alocasia Dragon Scale should be kept in a glass enclosure because it’s vulnerable to temperature drops and fluctuations. If you do not want to keep it in a glass enclosure, then look for an environment with temperatures ranging from 65-75 degrees Fahrenheit during the day and around 60 degrees Fahrenheit at night.

Is alocasia Dragon Scale poisonous?

Unfortunately, Alocasia Dragon Scale plants are poisonous to both pets and people. If consumed, they can cause mouth ulcers and gastrointestinal problems, therefore keep them out of the reach of dogs and children.

It has been known to cause damage to kidney and liver systems of adults. It is also highly toxic to bees, so beekeepers should take care not to have it in their beehive.

Alocasia Dragon Scale is a very popular plant and is taken quite seriously. This means that you will have to know what you are doing before tending this plant. It can cause serious problems if it is not cared for properly!

How Do You Take Care of Alocasia Chantrieri?

Are alocasia Cuprea and Red Secret the same?

How can I repot Alocasia Dragon Scale?

Repotting is a bit tricky with Alocasia Dragon Scale. You can repot them once every other year, but they don’t like when they are transplanted.

If you must repot them, try to limit yourself to once every other year. Because Alocasia like to be root bound, you won’t have to repot it very often. Simply repot your plant when it appears to require additional room. This will happen every other year, but it is ultimately determined by the pace of growth of your plant.

If you plan on repotting the Dragon scale, you must do so in the spring. This is because it needs warm soil and sunlight to grow properly.

After repotting, keep your plant in a warm environment for several months. This will stimulate root growth and give the plant time to adjust to its new home.

It is also important to allow Dragon Scale plants to dry out between watering. Overwatering them can cause root rot, which can kill your plants.

How big does an Alocasia dragon scale get?

Dragon Scale plants may grow up to 3 feet (1 m) tall and 16.6 feet (50 cm) broad in the right circumstances. However, each plant has its unique capability for growth, so don’t be concerned if yours doesn’t grow as much as others.

The most common sizes you will see a Dragon Scale Alocasia come in are either in small or large.

This species of plant has an average life span, which means it will need to be replaced every so often. Because this is a tropical plant, it can grow rather large and will require space for its roots to grow.

Therefore, you should only choose a space for the plant that it can properly reside in before it outgrows its home.

How can I propagate Alocasia Dragon Scale?

Propagating Alocasia Dragon Scale is not very difficult. Most of the time, you can propagate this plant by dividing it into small specimens.

Find all of the offshoots. You’ll need to take your Alocasia Dragon Scale out of its container to see the rhizomes while looking for a portion of the plant to divide.

Divide the pieces which have a clump of leaves that has a single root. Then you can use the clump of roots to grow your own Dragon Scale.

Dragon Scale Alocasia is known to be an easy species to propagate, since it is often sold in large specimens. You can either grow this plant from seeds or cuttings. To propagate from seeds, simply take the required amount of seeds and fill the rest with water.

Place in water or new potting soil and keep planted in a warm to cool room for about 1-2 weeks so that the seeds can germinate. Keep soil wet during this time, as it aids in the germination process. In a month or two, your seeds will be ready to be planted into their own soil pots.

You can also take a stem and an eye leaf, and use the stem as a frame for an individual plant while cutting the eye leaf into several pieces. Continue with your usual care, and your plant will grow from there.

When to Repot Alocasia Dragon Scale

Repotting is a watershed moment in the life of a plant; Alocasias might lose their leaves and fall dormant following repotting.

If at all possible, avoid doing that. The optimal time to repot is in the spring. However, if you must do it during winter, choose a container that can help retain heat.

Repotting Dragon Scales is not difficult, but it is necessary. Take away the soil from the roots. Fill up the container with fresh potting soil and place it somewhere warm for about 3 weeks after the repotting in order for your plant to absorb all of the nutrients completely.

Bring water (this is where attention to detail comes into play) to your plant until it begins growing again. Dragon Scales can get root bound and lose their leaves if they are not repotted. This can cause a plant to topple over and die, so it is best to repot soon after your plant has spent two years in its last pot.

Why is my alocasia Dragon Scale drooping?

Alocasia Dragon Scale is a tropical plant and as such will require a warm environment to grow perfectly. It is not uncommon for this to happen, however, if your Dragon Scales are drooping while they are still in their pot, then the plant might not be receiving enough nutrients. You need to repot it soon.

Droopy stems indicate that your Alocasia Dragon Scale is too dry. Alocasias store water in their stems and will perk up again after being watered.

Drooping can also be caused by mushy stems produced by root rot in rare circumstances. This is why it’s critical to feel the potting mix before watering.

The droopy leaves on your Dragon Scale might just be a sign that it needs to be repotted. However, similarly to the droopy stems, if the leaves are mushy and falling off, and then you may have root rot.

Try to make sure that this tropical plant is receiving enough water and light. Also, avoid overcrowding the plant in its pot as this can lead to problems with wet soil which can cause root rot.

Can alocasia dragon scale grow in water?

Just like most plants, Dragon Scale Alocasia can grow perfectly in water. They just don’t like to be submerged too deeply.

If the branch has developed roots, it will be just fine thriving in potting soil. However, if you believe the roots require more growth, we propose placing your new Alocasia Dragon Scale in water as a midway stage.

Being submerged too deeply can cause possible root rot. The soil will get water logged and the roots may not back down if you don’t take care of them.

Also, you do not want to place your Dragon Scale into a container that is too small for it because the roots might not be given the adequate space to grow.

If you’re Alocasia doesn’t require much room, then try dividing it into 2-3 plant pots instead of just 1 pot.