Atanasio Echeverra y Godoy was a Mexican botanist and artist working in the 18th century. He made substantial contributions to numerous different botanical works and is honored by the naming of the plant genus Echeveria.
In honor of Hermann August Theodor Harms, a German taxonomist and botanist who worked in the latter half of the 19th century, the genera harmsii and harmsii are often applied to plants.
In addition to these names, the Echeveria Harmsii is also known as the Plush Plant, Echeveria Harmsii Red Velvet, the Succulent Plush, the Red Echeveria, the Velvet Echeveria, and the Red Velvet Echeveria.
Other names for this plant include the Succulent Plush and the Velvet Echeveria.
When it reaches its full maturity, the Echeveria Harmsii plant can reach a height of approximately 12 inches and a diameter of about the same.
Despite its size, the plant may be notoriously sluggish to mature, with some specimens requiring anywhere from four to six years to attain their full potential.
The Echeveria Harmsii plant is one that can make use of fertilizer, despite the fact that it does not require it when grown in its natural environments.
During the warm seasons, the plant can be fertilized using a slow-release balanced fertilizer that has been created specifically for cacti and succulents.
The Echeveria Harmsii plant should not get any fertilizers at any point if it is being cultivated in areas with cooler climates and temperatures closer to winter.
Only during the times of year when the weather is warmer and there is active plant growth can fertilizers be applied to plants.
There are a number of factors that can cause your Echeveria Harmsii plant to die.
These reasons are;
The Echeveria Harmsii plant does best in locations where the soil does not become unduly saturated with water due to its abundance of it.
The succulent plant does not withstand lengthy periods of dryness either, therefore it is necessary to find the optimal balance between the two conditions.
When you excessively water your Echeveria Harmsii, it can cause the plant to wilt or die. This is because the plant can become highly susceptible to rotting when it has too much water and too little oxygen.
Many people make the mistake of thinking that succulent plants like the Echeveria Harmsii are able to withstand a myriad of different amounts of sunlight.
This is not the case. Instead, the plant requires a significant amount of sunlight in order to be healthy and grow.
Lighting that is consistent, but not too intense, is best for the growth of this plant. Too low light can cause the Echeveria Harmsii plant to lose its vibrant coloration and become sickly-looking.
On the other hand, too much light can cause the plant to burn and die.
The Echeveria Harmsii plant can withstand an occasional application of fertilizers, but excessive fertilization is not good for it and may cause the plant to die. This is because too much of it leads to the possibility of the roots rot.
A balanced fertilizer that is created especially for cacti and succulents is beneficial for the growth of your Echeveria Harmsii.
You can easily determine which type of fertilizer works best by following the instructions on its package or reading through reviews by others who have used it as well.
The soil that surrounds your Echeveria Harmsii plant should be well-drained.
If the roots of your succulent plant become waterlogged, it can lead to a number of problems. Soil that does not drain well can cause root rot, which is not a disease you want to have to deal with.
So I recommend using some perlite in your potting mix, as it helps improve drainage and provides some extra oxygen to the roots while allowing them to dry out faster after watering.
Echeveria Harmsii does better when the temperature is consistently and rather warm.
When the temperatures are too cold, the plant becomes more susceptible to disease and can die.
The Echeveria Harmsii plant is sensitive to frost and will perish if it is ever exposed to temperatures below 50 degrees Fahrenheit.
Avoid leaving this succulent outside in the cold weather throughout the winter because it is a plant that does best in USDA zones 9a through 11a.
During the springtime growth season, the Echeveria Harmsii produces stunning orange blooms in the shape of urns.
These flowers emerge from the center of the succulent’s rosette on long stalks that are golden in color.
This succulent, along with the other members of the Echeveria family, are not monocarpic, which means that the appearance of their flowers does not indicate that the plant is approaching its end of life.
Flowers, on the other hand, are a positive indication.
To stimulate flowering in your Echeveria Harmsii plant, all you need to do is boost the amount of daylight it receives on a daily basis while it is in its growing season and sprinkle a little bit of fertilizer into its watering regimen.
The thin fibrous roots of the Echeveria Harmsii plant grow at depths that are rather modest in comparison to the total size of the plant.
The shallow root system, despite its size, is very effective in absorbing water even from sources of moisture that are not particularly abundant.
The overexposure of the roots of the Echeveria Harmsii plant to water that has become stagnant can cause the roots to become highly sensitive.
This situation can cause the plant’s root system to become mushy and eventually decay, which can kill the plant. This might lead to the plant’s demise if it is not treated properly.
The Echeveria harmsii is a little succulent that has leaves that are a light green color and is fashioned like a rosette.
The edges and tips of the broad, generous leaves have a tint of crimson that gets darker when the plant is stressed by the sun.
This succulent has a smooth, velvety texture due to a covering similar to that of velvet that is found on the leaves of the Echeveria harmsii plant. Because of this trait, people sometimes refer to the plant as the Plush Plant.
Banner offering a free mystic succulent with every purchase made at Mountain Crest Garden
When fully mature, the diameter of this succulent is around 12 inches, and its height is approximately the same. Each leaf is somewhat longer than an inch and a half.
E. harmsii is an annual plant that blooms in the spring and develops a stalk that may be up to 4 inches in length.
Flowers in the shape of bells and bright crimson with golden tips can be found atop that stem.
This succulent, as with all other types of Echeveria, sleeps through the winter months. Your Echeveria Harmsii will enter a state of dormancy during the winter months, in which they will reduce their pace of development and make less use of the resources available to them in order to survive.
It’s possible that your Ruby Slippers could get discolored or droopy, and its growth will be slower than it normally would be.
During this time of year, you should water the plant less often so that it does not become too saturated with water.
During this time period, there should be no more additions of fertilizer to the soil.
This succulent plant is great to have in your garden, either on the ground or in containers.
It will make a wonderful houseplant if you wish to keep it inside during the winter months.
The Echeveria Harmsii is also a great choice for hanging baskets because it can be grown either indoors or outdoors.
One of the greatest choices you have for a succulent that requires little care is the red echeveria, also known as Echeveria harmsii.
Because it requires very little sunshine and very little watering, it is an excellent option for people who don’t have a lot of time to spend taking care of plants.
As long as you give your echeveria the care that it needs, you shouldn’t have too many problems with it.
Even while not all types of the plush plant Echeveria harmsii will produce flowers on their own, the flowers that they do produce are still quite pretty, and you will be able to appreciate their blossoms even more than you would normally.
There are a few reasons why your echeveria might develop a leggy appearance.
These reasons are;
The most common reason that houseplants develop legginess is because they do not receive enough light.
If your plant does not receive enough light, it will direct its energy into growing longer, more spindly stems on one side of the plant while producing practically no new growth on the other side.
You may fix this problem by relocating the plant so that it is nearer to a window or by purchasing a grow light.
Keep in mind that every time you water the plant, you should turn the container so that the opposite side is facing the window. This will ensure that all of the leaves get an opportunity to enjoy the light.
If you are overwatering the Echeveria Harmsii, this can cause it to have a leggy appearance. The plant will develop elongated stems if it is not provided with enough oxygen.
Also, excessive watering may lead to rot and root decay because the water is unable to drain from the pot properly.
Most of us only do this if we’re feeling really ambitious, but it may make a significant impact on the health of your houseplant.
If you haven’t repotted your plant in the previous year or two, the nutrients given by the potting soil are likely to be depleted, resulting in weak, limp stems.
Adding fertilizer during the growth season of Echeveria Harmsii can help it blossom and make those trademark red tips shine out.
When it’s time to water your succulent, apply a few drops of water-soluble fertilizer.
One of the most annoying and destructive pests that affects plants is overwintering scales.
These tiny pests spend the winter months on your plants, feeding off of its sap and weakening it in the process.
Echeveria Harmsii is particularly vulnerable to insect infestation because it’s a relatively soft-bodied plant.
Before you repot your Echeveria harmsii, make sure that you clean out all of the dead leaves and stems of the plant.
Diseases are another cause of legginess. If a fungus grows on the plant, it will weaken the stems and can even kill it.
If you notice that your plant is developing black spots on its leaves, cut away all of the diseased parts and discard them.