Does Ficus Retusa likes fertilizing?
In general, your Ficus Retusa requires little fertilizer. In fact, it might not require any at all.
A lot depends on the type of soil you have.
If you maintain the plant in the garden, you will only need to feed it if your soil is poor.
You may not need to apply fertilizer to your garden soil if it is loamy, rich in organic matter, or has been well-amended with compost.
If you’re growing the plant in a container, you’ll most likely be using potting soil. Because potting mix is frequently soilless, it is critical to determine whether the soil contains any fertilizer.
When you buy a plant from a nursery, it usually comes with fertilizer.
As a result, you want to know what kind it is and how long it will stay.
It is usually a slow-release fertilizer that can last up to 6 months.
If this is the case, you will not need to feed the plant for the following six months. Once the dosage is finished, begin supplementing.
At times, the dosage is only effective for a few weeks to a month and a half. If this is the case, you should supplement sooner rather than later.
When it comes to feeding, you want to be cautious, just as with water.
Similarly, as it is actively expanding, it will require more nutrition. You only need to feed your Ficus Retusa throughout the spring and summer.
You don’t need to feed it after fall and during the winter.
You may do this by applying a balanced liquid fertilizer (10-10-10) once a month. To avoid over fertilization, dilute it to half the recommended strength.
Too much plant food causes salt accumulation in the soil, which eventually burns the plant’s roots and leaves.
A delayed release fertilizer can also be used. You will only need to feed it twice in this situation. Once in the spring and once in the summer.
Finally, gradual growth is essential when growing it as a bonsai.
While fertilizer is still required, take careful not to overdo it because the plant will require much less because it is much smaller than its normal size. It also doesn’t have a lot of dirt.
How often do you repot your Ficus Retusa?
In a container, you should repot every 2 or 3 years. However, much will rely on how rapidly it expands. Because the plant like to be slightly pot bound, you may leave it there for an extended period of time.
However, if you notice roots trying to press their way out of the drainage hole at the bottom, it’s time to repot the plant.
Repotting is a simple process. However, you must use caution in order to limit the shock that the plant experiences when it is transferred.
Repotting is best done in the spring or early summer. Because it is actively developing, your Ficus Retusa can recover rapidly from the shock.
When selecting containers, go up 2 inches in diameter. You should also ensure that the new container has a drainage hole.
Also, have some new, well-draining potting soil on available to replace the used one.
Does Ficus Retusa flower?
The Ficus Retusa is an evergreen shrub or tree of the Moraceae family.
The trunks are light grey in colour and can grow up to 10 meters in height. Because of their lovely canopy, they are one of the most popular bonsai plants. The leaves are glossy and oval.
The milky latex fluid that oozes from wounds or injuries is shared by all fig Bonsai species. Tropical figs are either evergreen trees, tiny bushes, or climbing plants.
Some of them feature lovely blossoms, however the majority of Ficus species have concealed flowers in little receptacles from which their fruits develop.
Why my Ficus Retusa plant leaves turning brown?
If your plant’s leaves are turning brown, the most likely cause is overwatering.
This can lead to root rot, which results in leaf browning.
Most plants require watering about once a week, but young Ficus plants should only be watered about once every 3 weeks.
Low humidity is another possible cause of brown leaves.
If this is the case, you will need to increase the humidity level in your home or make sure that your plant gets enough air flow in its location.
Brown leaves can also be caused by a lack of sunlight or cold temperatures. If you see brown spots on your Ficus leaves, it could be something as simple as a pest or disease.
Why is my Ficus Retusa losing leaves?
The problem could be due to any number of reasons, but most often it’s due to one or more of the following.
Change in environment
The most common reason for Ficus leaves falling is that its environment has changed.
When the seasons change, Ficus leaves frequently fall.
At this time of year, the humidity and temperature in your home vary, which might cause Ficus trees to lose their leaves.
Both underwatering and overwatering can cause a Ficus tree to lose its leaves. The leaves of a Ficus tree that has not been adequately watered may yellow and curl.
Water the soil just until the top layer of soil is dry, and make sure your Ficus tree’s pot has sufficient drainage.
Too little light
Another reason Ficus tree leaves fall off is that the tree receives insufficient light.
A Ficus tree that receives insufficient light may often appear sparse and spindly. New leaves can sometimes be light, even white.
Ficus trees are vulnerable to a few pests that can cause them to shed their leaves.
A definite symptom of a pest infestation is when the leaves on the Ficus tree get sticky or have liquid trickling from them and fall off.
How do you stop Ficus Retusa from dropping leaves?
To assist with this, strive to maintain the surroundings of your Ficus tree as steady as possible. It should be kept away from drafty windows and doors, as well as air conditioners and heaters.
In the winter, when the air becomes dry, use a humidifier. Also, once you’ve got your ficus tree in place, don’t move it.
Water the soil just until the top layer of soil is dry, and make sure your ficus tree’s pot has sufficient drainage.
If you mistakenly let the soil of your ficus tree to entirely dry up, you may need to immerse the tree’s container in the tub for an hour to thoroughly rehydrate the soil.
In the case of Light, you should relocate the ficus tree to a more exposed place.
How do you propagate Ficus Retusa?
The simplest approach to propagate Ficus Retusa is by stem or leaf cutting.
Both use similar strategies. However, various portions of the plant should be used.
Propagation of Stem Cuttings
- Cut a 6 inch stem from the plant to propagate through stem cutting. Select a healthy stem that has at least a few leaves.
- You may also pick a longer branch and produce cuttings from different parts of that branch, as long as each cutting has at least 2 or 3 leaves.
- Plant the cuttings in the soil. For this, I like to use 66-inch plastic containers. Fill each container with one cutting (leaves facing up).
- You may also soak the cutting’s tip in rooting hormone before planting it in the soil.
- If you’re just propagating one or two, you may put a plastic bag over each one.
- However, when you multiply, I find it more convenient to acquire a large plastic bag and place all the containers in it before tying it.
- Store the plastic bag or containers in direct sunshine.
- They will begin to root in approximately three weeks. You may inspect them by taking them out of the container. White roots should sprout from the bottom of the root ball.
Propagation via Leaf Cutting
- You will remove its leaves here. You’ll need to remove between 10 and 12 leaves. You may also do more if you choose.
- Cut the leaves near the stem using a sterile pair of scissors or pruning shears.
- After that, you have a decision to make. They may be rooted in water or soil. Soil need more time.
- If you want water, acquire a tiny shot glass or one of those half-moon-shaped glass soy sauce containers. The container should be about 2 or 3 inches tall so that the leaves have something to lie against.
- Fill the container with water and arrange the leaves around the sides one by one. As you travel around, they will overlap one another.
- If you choose to root them in soil, prepare a broad, shallow container with well-draining potting mix. Wet the earth a little.
- Place the leaves vertically, with the sharper point facing up. Part of the leaves will be buried in the earth, perhaps a fifth or a quarter of the way down.
- Insert all of the leaves in this manner, forming concentric circles with a little space between them.
- The leaves will begin to root after around 3 weeks. Some will have longer roots than others. Others will not cheer at all. This explains why you used so many leaves.
- If you compare the two, you’ll find that the roots developed in soil are significantly smaller than the roots formed in water.
Does Ficus Retusa likes humidity?
Your Ficus Retusa, like other tropical plants, prefers humid circumstances. Maintain high humidity levels if possible.
However, it will be able to withstand most domestic circumstances as long as it does not become excessively dry.
If you reside in a region where the summers may be extremely hot or where the winters can be severely cold, it is a good idea to monitor humidity levels at this time.
Moisture evaporates fast in extremely hot situations. As a result, objects are left to dry.
Winter, on the other hand, significantly dries the air.
If you observe that humidity decreases below 40% frequently or for extended periods of time during the year, you should try one of the following humidity-increasing strategies:
Keeping it in the bathroom, which has the most humidity in the house.
- Mist it on a regular basis without over-wetting the foliage.
- Combination with other plants.
- Stacking it on top of stones in a water tray.
- Making use of a humidifier.
- Keep in mind that changes in one condition might have an impact on the others.
For example, if the plant receives a lot of sunshine and the weather is warm, it will require more humidity and watering.