Is Anthurium Papillilaminum Rare?


Is Anthurium Papillilaminum rare?

Papillilaminum Anthurium Croat, Anthurium Papillilaminum, unique tropical plants from the Exotic Rainforest. Anthurium Papillilaminum is one of the most unusual plants you’ll find in the tropics. It often gets its name because it’s look a little like a rosebud, but it’s actually more like a set of miniature leaves.

Some people might be surprised that this flower is actually rare, as it can easily be replicated with some creative gardening. But there are still plenty of reasons for why this plant should be admired by gardeners and anyone who enjoys plants in their home or garden space.

How do you take care of Anthurium Papillilaminum?

Anthurium Papillilaminum is highly regarded for its distinctive olive green foliage and opulent décor. Indeed, it is one of the most gorgeous Anthurium plants for home cultivation. However, as a Panama native plant, it requires a tropical climate to grow. Anthurium Papillilaminum is a low-maintenance houseplant that demands constant attention.


Anthurium Papillilaminum requires the same amount of water as other Anthurium species. Anthurium Papillilaminum should be watered every 9-10 days during the growth season and every 18-24 days in the fall and winter. It requires slightly damp soil to aid roots in nutrient acquisition and to transport moisture from roots to leaves via stems.

Excessive watering, on the other hand, might result in extremely wet soil, resulting in water-stressed roots that are unable to receive nutrients. Limping, yellowing, and wiggling leaves all signal plants that are water stressed (overwatered).


Anthurium Papillilaminum requires indirect sunshine throughout the day and will shed leaves in the absence of sufficient sunlight. However, this does not imply that it will require direct sunshine. Anthurium Papillilaminum, a tropical plant that thrives in natural shadow, thrives in areas with dispersed sunlight, such as that reflected from a window, wall, or curtain.


A tropical plant naturally flourishes in warm, humid circumstances. Anthurium Papillilaminum prefers a temperature range of 70°F to 90°F (21°C to 32°C). They thrive in regions with year-round temperatures of +50°F, such as USDA zones 11-12. You can still grow them successfully in USDA 9-10 zones, but they must be brought indoors when the temperature falls below 50°F.


To keep a tropical plant alive at home, you must slightly increase the humidity level. The same is true for Anthurium Papillilaminum, which flourishes in areas with 40%-60% relative humidity. Because it is hard to naturally reach a high relative humidity level in the home, you must resort to artificially increasing the humidity level.


To prepare a well-draining ground, create an ideal mixture of healthy soil that contains organic matter. Anthurium Papillilaminum demands a well-draining, organically rich soil that holds just enough moisture to maintain a somewhat wet environment.

Additionally, maintain a slightly acidic potting mix (5.5-6.5), which is ideal for tropical plants. It should not, however, compress in extreme heat and drought to avoid waterlogging.


Fertilize Anthurium Papillilaminum sparingly, since a new potting mix includes all the nutrients the plant need. After potting your plant, you would not need to fertilize it for at least six months.

However, during the growth season, some moderate plant food is more beneficial than detrimental to Papillilaminum. Unlike other Anthurium, Papillilaminum does not require excessive fertilization; however excessive fertilization might cause chemical stress in the plant.


Repotting of Anthurium Papillilaminum is required only after it has grown to double its original size. Repotting every 2-3 years is sufficient to maintain the Papillilaminum roots’ prominence.

Consider repotting it in early spring to a container that is 2′′ larger than the last container. This enables the plant to receive nutrients from the newly mixed soil throughout the growth season.


Anthurium Papillilaminum, despite its exotic look, is a low-maintenance plant. On the other hand, Anthurium require periodic pruning to be happy and healthy. Pruning Anthurium on a regular basis assists in keeping them upright and balanced.


Propagation of Anthurium Papillilaminum is performed by dividing mature plants and dividing lateral stems. This is the simplest method. Typically, the technique is performed during transplantation. The division is carried out with a sharp knife, and the cut areas are dusted with crushed coal. Separated plants are watered extremely carefully after being placed in a separate pot. They will not take root if they are submerged in water.

Ripe seeds should be planted promptly after being cleansed of pulp to maintain viability. The seeds are strewn throughout the earth’s surface. They are not dropped from above, but rather softly pushed to the ground and sprayed with a spray bottle. A container containing seedlings is placed in a mini-greenhouse and kept warm. After 7-14 days, shoots will develop.

How to identify Anthurium Papillilaminum?

It is difficult to tell Anthurium Papillilaminum from the Anthurium “Papilionaceum”, and it is often said that the two resemble each other. But in fact, there are distinct differences between the two plants. Anthurium Papillilaminum has distinctive olive green leaves on long petioles, while “Papilionaceum” has predominantly red-violet leaves with a paler mid-rib.

On the other hand, Anthurium Papillilaminum has smooth, glossy, and neater foliage than “Papilionaceum”. Anthurium Papillilaminum is also smaller than its look-alike plant. It grows to a maximum height of about 18 inches (45 cm) and a width of about 12 inches (30 cm).

Anthurium Papillilaminum is harder to locate than some other types of Anthurium. It is relatively easy to identify this plant as the Anthurium Papillilaminum when it flowers. Red-purple flowers are borne on long pedicels in spring and summer.

How fast does Anthurium Papillilaminum Grow?

Anthurium Papillilaminum is slow to moderate grower that can grow a few inches per year. Anthurium Papillilaminum tolerates low temperatures but must be kept indoors when the temperature is below 50 degrees Fahrenheit (10 degrees Celsius).

Seeds can be started indoors 6–8 weeks before last frost. Plants should be spaced apart 3 to 6 feet apart. However, they need to provide with a minimum amount of light and fertilizer. When it grows, only a small amount of fertilizer is needed each month.

Some Anthurium species may grow up to 2 feet long in a single growing season, while Papillilaminum development is quite modest. The plant needs a lot of light, but it must be protected from cold and drafts when it is young.

It is best to plant Papillilaminum in a container with drainage holes. Papillilaminum requires moist, rich soil that is high in organic matter. They prefer warm temperatures and full sun. Fertilize with a fertilizer that has potash, phosphorus and magnesium such as 10-10-10 at planting time and once every three months during the growing season.

Can Anthurium Papillilaminum Survive Overwintering?

Anthurium Papillilaminum species may live outside in non-tropical zones throughout the winter. Anthurium Papillilaminum can survive winter outdoors in mild areas, but it must be kept moist. The soil should have good drainage, and it should be watered when the soil is dry. Anthurium Papillilaminum tolerates cooler temperatures and grows best in USDA Zones 10–11.

When the plants are first planted, cover them with a temporary shade cloth for protection from extreme temperatures. However, providing with a minimum amount of light and fertilizer is needed when Anthurium Papillilaminum is young. Astrophytum myrianthum is another plant that is closely related to Anthurium Papillilaminum.

The plant tolerates low temperatures but must be kept indoors when the temperature is below 50 degrees Fahrenheit (10 degrees Celsius). It supplements soil nutrition with occasional fertilization.

Similarly, Papillilaminum would not fare well outside in winter or when the temperature goes below 60-degrees Fahrenheit.

Bring it inside and maintain it in a warm, warmly lighted spot around the home. A bathroom atmosphere would be excellent for this plant.

How to Obtain Seeds from Anthurium Papillilaminum?

Obtaining seeds from Anthurium Papillilaminum might be challenging because the seed-bearing flower can only multiply via direct pollination by insects, notably a beetle.

If pollinated, the plant will produce berries that carry 1-2 seeds. The berries ripen in October, and once they have ripened, they will fall to the ground. The most important stage to obtain the seeds is that they are still green and firm. Once they have turned brown, the seeds are no longer viable.

Anthurium Papillilaminum needs full sunlight, warm temperatures (65 F – 85 F), rich soil and regular watering to thrive. Sow seeds in a mixture of equal parts topsoil, peat moss and sand or perlite. Press the mixture firmly on top of the seeds, and keep them moist until they begin to sprout, which may be several weeks. Plants are somewhat slow growing, so do not be alarmed if they do not sprout for a few weeks.

Does Anthurium Papillilaminum have any Benefit?

Anthurium Papillilaminum plants are one of the preferred houseplants since their gorgeous leaves are equally vital in absorbing airborne pollutants.

It efficiently eliminates cancer-causing substances like ammonia and formaldehyde from indoor air. Anthurium Papillilaminum is also a home remedy for treating headaches, sleeping disorders, and immune system enhancement.

Its leaves are used in traditional Chinese medicine to treat dermatological disorders like acne and warts. Anthurium Papillilaminum is also used as a mouthwash that kills bacteria left in the mouth after teeth cleaning.

Anthurium Papillilaminum only needs soil-based solutions, so it does not need much of water in growing conditions. The leaves are commonly used to eat as a salad or dessert. It also has a sweet flavor, which makes it extremely popular among kids as a food.

Anthurium Papillilaminum can help you reduce the cost of gardening and is perfect for adding beauty to your home. It can be placed in any room, including the bathroom. It works great as an aquarium plant because of its foliage and flowers that provide colorful splendor all year long.

Can you mist Anthurium Papillilaminum?

Anthurium Papillilaminum can be misted when it needs water, but you should soak the soil well and not just spray the leaves. When you mist the leaves, do not do it often and close the windows to avoid mildew on the plant. Soaking well before misting promotes healthy growth.

However, avoid overwatering so that your plant does not get root rot. The leaves are sensitive to salt, so be aware of this when watering after applying pesticides or de-icers.

Do not allow your Anthurium Papillilaminum to sit in water or moist soil for a long period of time. It is a tropical plant, so it can get sunburned easily.

Anthurium Papillilaminum is a relatively hardy houseplant, but it needs less attention than ground-hugging plants like ferns and forget-me-nots. It does not need much of fertilizer. The leaves tend to drop off when the weather heats up, but they will grow back when the weather cools down.

Similar Posts