Is Calathea White Fusion Rare?

Is Calathea White Fusion rare?

Is Calathea White Fusion rare?

Calathea White Fusion is a rare plant. The White Fusion is one of the most distinct members of the Calathea family, with white, green, and lilac marbled leaves with a pale purple underside. It’s a rare beauty that grows slowly but makes a fantastic addition to any indoor jungle.

Calathea White Fusion is water-retentive and makes a great houseplant. A small pot is recommended to prevent tip pruning, which can easily happen in dry conditions. The plant has the best colors when it is grown in high light conditions, but tends to fade in low light areas.

The leaves are a pretty green color on top and white underneath. The leaves are striped with purple or white and arranged in a fan shape.

Calathea White Fusion is one of the easier Calathea plants to grow, although it does have some specific requirements for optimal growth and health. These plants do fine indoors as long as the temperature is between 65-80 degrees F. (18-27 C.).

Why is my Calathea White Fusion dying?

Calathea White Fusion is a plant that is native to Brazil. The causes of plant to die are;

Too much light:  Calathea White Fusion is a sun loving plant and requires full sun to thrive. The leaves grow weak, pale or yellowish in color and burn or become transparent when exposed to direct sunlight for too long. The leaves may also develop spots that are brown or black.

Low humidity:  Calathea White Fusion requires a certain amount of humidity to thrive. It’s important not to let the soil dry out during watering or leave them in drafty areas. The leaves may discolor, feel stiff or brittle and fall off from the plant when there is not enough humidity.

Overwatering:  This is probably the number one reason why houseplants die. When you water your plant is sure to fully saturate the soil, and then wait for the top inch or so of soil to dry out before watering again.

Underwater:  This is probably the number one reason why houseplants die. When you water your plant, be sure to leave the drainage hole of the pot not empty, but allow a little soil to remain above the root ball.

Too much fertilizer:  Fertilizer is a must for houseplants. Calathea White Fusion uses a lot of water and nutrients from fertilizer and should be fertilized according to the instructions on the label.

Low temperature:  The leaves of Calathea White Fusion will turn pale and yellow (or possibly even brown if the air is very dry) if it is exposed to very low temperature (between 45-50 F.).

Poor drainage:  Calathea White Fusion needs good drainage. If the soil is not draining well, or the drainage hole is clogged, the plant roots may rot and die.

How do you care for Calathea fusion white?

The most important thing in caring for your Calathea White Fusion is to understand its growing requirements. Calathea White Fusion prefers the following aspects;

Soil

For Calathea White Fusion, use an African Violet-specific potting mix or create your own using peat moss, perlite, and potting soil.

As with other house plants, the key to supplying the proper quantity of water to your Calathea is to place it in the proper soil mix.

Calathea White Fusion thrives in a commercial African violet soil mix that is sufficiently peaty to keep necessary moisture but also completely free-draining to prevent the roots from becoming saturated in water and decaying.

Watering

White Calathea Fusion until the top 2″ (5cm) of soil is nearly dry to the touch. Calathea White Fusion prefers constantly wet soil, but if the soil becomes saturated, root rot will occur. To determine whether or not to water your Calathea, simply insert your finger in the dirt.

If the top inch of soil is dry, it is time to water thoroughly. It is critical that any surplus water drains out via the hole at the pot’s bottom.

Light

Indirect light is ideal for a Calathea White Fusion. Calatheas are endemic to tropical jungles, where they get only diffused light via the forest canopy. To replicate this, offer filtered strong light to your Calathea White Fusion. Avoid south-facing windows, which frequently receive an excessive amount of sunshine. Never expose the pot to direct sunlight.

Temperature

Calathea White Fusion like the location’s continuous warmth. Maintain a temperature range of 65 to 80°F (18 to 27°C). Avoid placing your Calathea near a source of heat, an air conditioner, or a draft.

Humidity

As with adequate watering, maintaining a high humidity level is critical to maintaining a happy Calathea White Fusion. A humidity level of at least 85% is extremely ideal. And humidity level of 60% or above is required.

You may wish to use a humidifier. If you do, your plant will be really happy. You may set the Calathea pot on a tray of watered stones. You may hang it on the bathroom window, provided it is not sprayed with hot water. It will like the humid steam.

Fertilizer

Calathea White Fusion will benefit from monthly feedings of a balanced liquid house plant fertilizer such as NPK 10-10-10, diluted in half.

Alternatively, you may select organic fertilizer. While commercial items are available, you may easily create your own.

Repotting

Calatheas are slow growers, and in most situations, they will only require repotting once a year or once every year and a half. Repot your Calathea White Fusion in a larger pot than the one it is now in. If you prefer that your plant does not get too large, repot it in the original container. Replace the soil with new and properly water your plant.

Pruning

Calathea White Fusion pruning is removing damaged, curled, or browned leaves. Remove a diseased leaf from its stalk. Do not be concerned if you need to remove more than one. New leaves will immediately sprout in their place.

Propagation

If your Calathea White Fusion becomes large enough, it will form clumps on its sides. These clumps can be divided and replanted as individual plants. Divide your Calathea into many plants at the time of repotting, in spring or summer, when it is actively growing.

Should you mist Calathea White Fusion?

As a houseplant, Calathea White Fusion requires misting. Prefers greater levels of humidity, approximately 75 percent or above. If the air around the plant is excessively dry, you can spray its leaves from time to time.

This will help it to look its best by making the leaves shine and giving them a nice boost. You should also see an improvement in its health, as many houseplants are sensitive to the drying effect of air conditioning and heaters.

Misting will also refresh your Calathea White Fusion if it is placed in a drafty spot or near air vents, so it will be happy with you.

Is Calathea White Fusion hard to care for?

Calathea plants are beautiful, and they’re a lot of fun to have around, but it’s important to remember that they’re still tropical and indoor plants. If you don’t provide them with adequate light, temperature, humidity, and water, they won’t thrive.

Neither will you! Calatheas are very forgiving of misuse or neglect, but if you want your plant to look its best and live a long life, make sure it has the right environment.

The biggest mistake most people make is not providing enough light. Calathea is native to the rainforest, where they get plenty of diffused light. They’ll do fine in indirect morning or afternoon sun, but they don’t like direct midday sun and full mid-day sun. If you don’t provide enough light, the leaves will be thin and weak looking and they will start to yellow.

While it’s true that Calathea are very forgiving plants, overly moist soil will result in root rot. This is a fungus, and it will start to attack your plant’s roots. If you have a pot from several years ago, you might have soil that has grown heavy with mosses, vermiculite and other materials. They are best soaked overnight to remove them.

You should water your Calathea thoroughly once every week or two weeks during the summer months (October-May). In winter (June-September), they may need watering every ten days or so.

Fertilizing is important, but be careful what you use. Calathea is not big feeders. You can fertilize every time you water with a houseplant fertilizer diluted by half (1/2 tsp. in 1 quart of water), or you can fertilize monthly with a balanced liquid fertilizer, such as 10-10-10, diluted at about one-quarter strength. Organic fertilizers are an excellent alternative to chemical ones.

Can you propagate Calathea White Fusion?

Calathea White Fusion will readily form clumps, which can be divided and replanted. If you want a few Calathea plants to start out with, it is not difficult to create your own. Take note of the number of leaves they have.

Each time you divide them, count the number of leaves by making a mark on multiple stems. When the desired number of leaves appears, split them up again into four or five stems each. When they are large enough to handle, plant them in fresh soil. Calathea White Fusion is best propagated this way. This process is called layering.

If you want a larger number of plants, you can take several pots with Calathea White Fusion from different plants and plant them together in one pot.

If you take baby pot plants, they may not grow to be adult sized as quickly as if they are transplanted directly into their own pots.

Can you repot Calathea White Fusion?

Your Calathea ‘White Fusion’ will occasionally require repotting in new soil, depending on its environmental circumstances and the frequency with which you fertilize it. To refresh the soil, repot it once a year (or every two years).

Calathea plants that get rootbound are susceptible to fungal diseases, which can be fatal. Each time, increase the container’s size by an inch or two.

While Calathea White Fusion can tolerate repotting, some plants can become rootbound during the process. Repotting may cause the plant’s root balls to bruise and rot, so it is best to repot in the fall or winter, when the pot will be empty for a few months.

If you leave roots in an overly large container for too long, bacterial infections can occur. You might see root rot.

How much water should I give my Calathea White Fusion?

Watering your Calathea white fusion will take up most of your time. Just as with humidity, the plant may be finicky about moisture. Water it thoroughly to ensure that the soil is wet and moist. However, take care not to let it become soggy.

When the top 1-2 inches of soil are dry, water. When watering, water the plant gently and moderately from above, allowing the water to soak into the roots, and then tipping away any excess water. To determine whether or not to water your Calathea, simply insert your finger in the dirt.

If the top inch of soil is dry, it is time to water thoroughly. It is critical that any surplus water drains out via the hole at the pot’s bottom.

If the soil of your Calathea is still damp when you touch it, wait a few days before checking again. With practice, you will develop an uncanny ability to determine just when to water your picky infant. Calathea is extremely sensitive to fluoride, which is frequently added to municipal drinking water.

Water you’re “White Fusion” using rain, filtered, or bottled water to minimize fluoride poisoning. If you’re on a budget, fill the bucket halfway with tap water and leave it overnight to allow the gas to dissipate.

Is Calathea Dottie easy to care?

Can you propagate Calathea White Fusion in water?

What is the best temperature to grow Calathea White Fusion?

The White Fusion Calathea prefers temperatures between 65-75° F during the day and 60-65° F at night. The average temperatures in the winter months (October to May) should be around 65-70° F during the day and 60-65° F at night. In warm months (June to September), temperatures should be around 70° F during the day, with a drop of 10 degrees at night.

In winter, a humidifier or a cool mist humidifier can be used to keep the plant moist; however, it is best not to use a humidifier during the summer months. If you live in an area of the country with hot summers and mild winters, you can grow your Calathea year-round. It is better to give it some time off during the winter months.

How do you keep Calathea White Fusion happy?

Simply stay out of direct sunshine and avoid overwatering. Prefer warm temperatures between 65 and 80 degrees Fahrenheit. Maintain a safe distance from drafty windows and air conditioners. During the growth season, feed with a light liquid indoor plant fertilizer about once a month.

Also, be sure to maintain the proper environment temperature. High temperatures can induce leaf-drop and browning of foliage. Watch out for pests. If insects appear, use a systemic insecticide. And remember, the leaves of Calathea White Fusion still have their natural oils. Avoid using detergents, pressure-hosing, or other harsh chemicals on the leaves.

Can Calathea White Fusion revert?

Calathea ‘White Fusion’ plants have the ability to revert — a process in which variegated foliage plants reverts to their all-green state. This is frequently the case because “variegated plants are selected from a mutation of a pure-green plant,” as the Royal Horticultural Society puts it.

The organization recommends that gardeners never mix variegated and green plants together in the same pot. From there, the all-green side of the family can ultimately overtake the variegated side.

If you want to keep your chances of this happening to a minimum, make sure that you always display your plants in a pot by itself — preferably not next to any other Calathea or any other plant whose leaves are different colors. Always make sure that your plant receives plenty of light without getting burned.

If your Calathea White Fusion has begun to revert, you can restore its leaves back to their luscious green form by pulling off any leaves that have turned yellow or white and either potting them into new soil or destroying them.

When choosing a pot for your plant, make sure that it has a wide enough opening for the roots to extend and absorb water. A pot with both drainage holes and holes or slits on the side is also best.

Before placing your Calathea White Fusion in a new pot, scrub the soil with water until all debris is removed. If you are not using new soil, let the plant soak in rainwater or spring water to remove any excess salts from its old soil.

Similar Posts