Why My Monstera Siltepecana Leaves Is Are Turning Yellow?
Why My Monstera Siltepecana Leaves Is Are Turning Yellow?
The yellowing of a Monstera Siltepecana plant can be caused by many factors. Some of the most common culprits include excessive over-watering and root rot. Both of these factors make the soil around the roots become too moist and unsuitable for growth.
The yellowing issue in your plant can be caused by low light levels, fungal infections, and other problems that might not have anything to do with its current condition.
If Monstera Siltepecana is allowed to dry out too much between watering, the bottom leaves may become yellow. Typically, you should water your plant at least once every week.
Always inspect the plant before watering, since you do not want the soil to be excessively wet for an extended period of time. The following are the reasons for Monstera Siltepecana leaves are turning yellow;
Lack of light: Most plants require adequate lighting in order to be healthy. If your Monstera Siltepecana is not getting enough light, the leaves may turn yellow. It is important that you place your plant in a spot that gets plenty of natural sunlight or artificial light.
Yellowing leaves can also be caused by placing the plant under fluorescent lights, which are typically not as powerful as natural sunlight and do not emit the right spectrum of light for plant growth.
Overwatering: Overwatering can be a big problem for indoor plants, especially if there is too much humidity. If the soil is too damp, the roots may rot and cause yellowing of the leaves on your plant.
Poor air circulation: Monstera Siltepecana requires an adequate amount of air circulation in order to stay healthy. Keeping your plant in an area with poor air circulation can lead to many different issues, including yellowing of the leaves.
Underwatering: This is a very important factor for your Monstera Siltepecana plant. Low levels of moisture, which can be caused by Underwatering, can cause the soil to become too dry and can lead to yellowing of the leaves.
Cold temperature: Monstera Siltepecana is native to areas with a tropical climate. This means that it cannot stand cold conditions. If the temperature of your house drops below 60 degrees, this plant will become stressed and may lead to yellowing of the leaves.
What Is A Monstera Siltepecana?
Monstera Siltepecana is a tropical plant that thrives in warm, humid conditions. Monstera is related to the philodendron, climbs like a vine, and its enormous green leaves have a silvery tinge, hence its popular name, silver monster.
The leaves of the Monstera genus are distinctive because the silver patterns vanish as they age. In addition, the Monstera Siltepecana leaves become bigger and develop holes, giving rise to its other popular name, the Swiss cheese plant. Siltepecana is one of the rarest of the 45 different varieties of Monstera.
It is commonly known as silver Monstera vine, and it is a type of leafy, flowering tropical plant. The Monstera Siltepecana is native to Central America where it grows in warm, humid parts of the region.
It has thick leaves that can grow up to 12 inches wide and 24 inches long. In addition, this species does not usually flower or produce fruit, but in rare cases it will develop small white flowers.
The Monstera Siltepecana is a vigorous climbing plant that can grow up to 8 feet tall and spread out to about 3 feet wide.
It does best in warm rooms with low light conditions, and it can thrive in either partial or full shade. In order to propagate Monstera Siltepecana, you will need to use a vine or stem cuttings from an existing plant.
Where Does Monstera Siltepecana Originate?
The Monstera Siltepecana is native to Mexico and other Central American countries. The tropical plant is typically found in warm or humid, damp environments, climbing the side of trees. As an epiphytic creeper, it prefers to climb trees or other suitable surfaces.
Its native habitats include the following Central American countries; Belize, Costa Rica, Guatemala, El Salvador, Honduras, Mexico, Nicaragua and Panama.
The Monstera Siltepecana has proven to be one of the hardest tropical plant species to grow in the United States.
It is slow growing and a challenging species to propagate. The Siltepecana will grow well in moist conditions and can survive dry soil conditions. The plant is not picky about the soil it grows in, but it needs to be continually moist.
The silver vine can grow up to eight feet tall and up to ten feet wide. It will typically climb trees and other plants in its native environment. It is considered a tropical vine that needs warm temperatures year round with high humidity.
The Monstera Siltepecana is considered one of the hardest varieties of Monstera to grow because it requires a continual source of moisture and direct sunlight.
How Do You Propagate Monstera Siltepecana On Water?
Water propagation is effective in the majority of instances and has the added benefit of being quite easy to see. Many people wonder why plants may be submerged in water without rotting. If you plant your plants in soil that has been overwatered, the roots will immediately begin to rot.
The combination between soil and an excessive amount of water is what causes rot. The following are steps to follow when propagating Monstera Siltepecana on water;
- Prepare a sterilized and decontaminated knife or pair of scissors. Use rubbing alcohol and heat the blade for few seconds with a flame. Thus, you ensure that the motor plant is not contaminated.
- Cut beneath a node using clean scissors or a knife.
- Fill a container with room-temperature water
- Rainwater or distilled water is the greatest type of water to use. However, tap water is safe to drink.
- Put the cut directly into the water.
- Ensure no leaves are buried, since this might cause decay.
- Changing the water every few days ensures that it remains fresh.
- Water containing oxygen will accelerate the roots process.
- Until your Monstera Siltepecana produces new roots, do not prune it.
- After 2-3 weeks roots will start to sprout
- When the Monstera’s roots are several inches long, you may now plant it in the soil.
Does Monstera Siltepecana Fenestration?
Monstera Siltepecana is known for its giant, green leaves. The enormous leaves have holes in them, making it resemble a block of Swiss cheese. This variety of Monstera vine was given the popular name “Swiss cheese plant” because of its appearance.
The appearance of Swiss Cheese Plant may be misleading and not all plant varieties produce cheese-like holes in their leaves, however Monstera Siltepecana has been bred to create these holes on its leaves.
As Monstera Siltepecana ages, it may acquire tiny holes along the center vein in its leaves. At full maturity, this species can exhibit the distinctive Monstera fenestrations of split leaves and center holes.
Monstera Siltepecana can produce fenestrations on its leaves after several years of cultivation, which depends on the environment in you are growing it.
The Swiss cheese plant is a favorite among plant enthusiasts and Monstera Siltepecana is easy to propagate, but more challenging to grow in the United States.
Monstera Siltepecana is native to Central America and grows in warm, humid environments. If you want to grow your Swiss cheese plant at home, you need a location similar to its natural habitat.
Are Monstera Siltepecana A Philodendron?
Monstera Siltepecana, also known as Philodendron Siltepecana, does NOT belong to the Philodendron genus. It belongs to the plant genus Monstera. Monsteras and Philodendron are both members of the Aroid or Araceae family of plants.
Monstera Siltepecana is in the same plant family as philodendron, however there are several key differences. Monstera Siltepecana has giant leaves and stems, but Philodendron species are not nearly as large. In addition, Monstera vines have holes in the middle of their leaf while Philodendrons do not.
The Swiss cheese plant is a highly prized houseplant and can be difficult to grow in authentic sunny environments that have consistent moisture conditions.
If you are interested in growing Monstera Siltepecana, it is best to start with a young plant that has been propagated by cuttings or division. Monstera vines will do best in partial sun and medium light conditions.
Monsteras grow through several methods of propagation, including division and stem/vine cuttings. Unlike other members of the Aroid family, Monstera vines produce separate male and female flowers on the same vine.
How Often Should I Water Monstera Siltepecana?
Your Monstera Siltepecana should be watered once a week. It requires a lot of moisture and if you water it too often it will become over watered and could develop mildew. If your plant has a deep root system, water it every day.
Over watering will kill your Monstera Siltepecana and cause it to rot and die. Monstera Siltepecana will develop small yellow spots on the leaves if it is over watered.
Monstera Siltepecana should have somewhere between 50-55% humidity. If you are having a hard time increasing the humidity, there are many other plants that would be better suited to your needs.
Monstera Siltepecana is not very picky about soil conditions, but it prefers well-drained soil with a pH level below 6.5. The Monstera vine will not grow in dry soil, especially if the temperature is below 60 degrees Fahrenheit.