How Do You Take Care Of Aeonium Urbicum?

How Do You Take Care Of Aeonium Urbicum?

The succulent plant Aeonium urbicum (Saucer Plant) is a lovely addition to any yard or house.

However, before you purchase an Aeonium urbicum, you must understand how to care for it and propagate the plant so that your succulent will have a long and healthy life in your green area!

Requirements for lighting

Aeonium Urbicum has evolved to thrive in direct sunlight. As a result, while deciding where to plant it, you should make sure it gets enough sunlight. It is better to put it outside due to its need for sunlight.

You can even plant it in a container inside the house, but make sure it has access to sunlight. The plant’s size is another reason why it is best suited for the outdoors.

If you keep it inside, you’ll have to constantly working on it to keep it from reaching its full height, which can be difficult in an enclosed space.

Temperature requirements

The Aeonium urbicum prefers warm temperatures that vary from 50 degrees Fahrenheit to 95 degrees Fahrenheit all year, with nighttime lows no lower than 60 degrees Fahrenheit or 18 degrees Celsius.

Temperature is an important factor in deciding whether or not to plant it indoors. It enjoys temperatures in the 9b-11b -3.9oC range (25oF). If you live outside of this zone in colder climates, you should keep it indoors. If it is exposed to sunshine, it will survive in the house.

Watering requirements

Choosing a pot in which to grow the Urbicum is critical to the plant’s general health. Terracotta pots are permeable and prevent soil from becoming moist by allowing faster water evaporation. Waterlogged soil causes root rot, which is the number one killer of this plant.

Because this plant is succulent and stores water in its leaves, it does not require frequent watering. When the soil dries out, this is the perfect time to water Urbicum.

Of course, in the summer, the water evaporates faster than in the winter, and you will need to water more frequently. When the top inch of soil is entirely dry, you know your soil has dried out.

Moisture requirements

It enjoys humidity levels ranging from 40% to 70%. If necessary, a humidifier can be used; however, this should only be done once a day for four hours during dry seasons.

If you live somewhere hot enough that you don’t need a humidifier but still want one, choose a cool mist or vaporizer rather than a warm mist humidifier.

The optimal humidity level for this plant is between 30% and 40%. When the humidity level is too high, the leaves can decay, curl, and dry up.

Soil specifications

Although it dislikes being wet, this plant requires more water than other succulents in its genus. As a result, the potting mix you use should be distinct from that used for other succulents.

It should not be grown in cacti potting soil. The potting mix drains too quickly and may be unsuitable for the plant. Mix commercial pottage with perlite to make it suitable for Aeonium urbicum.

Feeding requirements

The urbicum’s native environment is rocky, and it lacks nutrients. As a result, your plant does not require a lot of feed. During the growing season, feed it once a month with a quarter-strength succulent fertilizer.

Overfeeding may harm the plant because it is not designed to produce a large amount of fertilizer. Superphosphate fertilizers should be avoided since they may contain plant-toxic chemicals.

How Do You Propagate Aeonium Urbicum?

Succulents like Aeonium urbicum are very easy to grow. Stem cuttings, leaves, or offsets can be used to propagate them.

Stem Cuttings

  • A small piece of the stem can be used to propagate Aeonium urbicum. A healthy plant should be used to cut a small Aeonium stem cutting with a diameter of half an inch or more.
  • Allow the cuttings to callous for a few days before planting in well-drained soil.
  • The cuttings will quickly grow into a new plant. More stem cuttings can be used to create a continuous supply of aeoniums for your garden.
  • This is also a great way to propagate an Aeonium that has lost its leaves or has been damaged in another way, such as frost or insect damage.


Leaf cuttings can be used to propagate Aeonium urbicum plants.

  • You must carefully remove one leaf from a healthy mother plant to propagate the Aeonium urbicum succulent plant.
  • Allow a few days for the cut end of the succulent to callous before planting it in well-draining soil.
  • Leaves are far less sensitive than stems. They don’t have to wait as long after being cut to replant them in good potting mix or garden soil.
  • Water them on a regular but sparing basis until they have rooted and begun to establish themselves again.
  • Then, while you’re waiting for established roots to provide moisture on their own, water more liberally to avoid drying out.


Offsets or pups are propagated by the Aeonium urbicum plant.

  • A mature Aeonium will produce an offset once a year, with growth rates depending on climate and temperature.
  • When a pup is 12-14 inches tall, it is time to separate from the mother plant.
  • To separate a pup, use a sharp knife or pruning shears to carefully separate it. Take care to keep as many of the offset’s roots as possible intact.
  • Plant the offset in well-drained soil and water frequently.
  • The offset will form its own root system and should be self-sufficient in a few months.


Because the plant begins from scratch, seed propagation is more difficult than other methods. Purchase certified seeds and sow them in a seedbed, tray, or pot. The seeds should be planted approximately an inch deep in the soil. Water them on a daily basis and keep the temperature around 25o Celsius to promote germination.

How Do You Prune Aeonium Urbicum?

This plant doesn’t require much care, but make sure there are no dead leaves dangling from the stem. Remove the dead leaves using a sharp knife, taking care not to damage the stem.

Because it’s blooming season in the spring, you could want to take some cuttings from the mother plant if it’s old enough to blossom.

  • Aeonium urbicum requires only a light trimming twice a year.
  • To maintain your Aeonium urbicum healthy, remove any dead leaves or blossoms as they wither.
  • You may also need to remove older leaves if they appear damaged due to climatic reasons such as cold or drought.
  • Because these plants develop slowly, it is vital to remove old growth on a regular basis if they are to not only survive but thrive.
  • Pruning Aeonium urbicum is a difficult process due to the slow growth of these plants. Any severe pruning may cause them to cease developing for a period of time as they recover from the shock of being severely pruned.

How Do You Repot Aeonium Urbicum?

Outdoors is the ideal place to grow Aeonium urbicum. Repot your aeonium every 2 to 3 years, using fresh soil.

This is a resilient plant that doesn’t require much attention. If the weather becomes too dry or hot for your succulent to live outside, you may choose to move it into a pot.

To reiterate:

  • The optimal time to repot an Aeonium urbicum in a container is when it has outgrown its current one and appears healthy and sturdy enough for the endeavor.
  • Potted plants should be transplanted in the late fall, winter, or early spring. This time of year, offers additional hours of sunlight while avoiding frigid conditions.
  • When transplanting the succulent into a new container, leave at least one inch (approximately 25 mm) between the bottom edge of the root ball and the soil level.
  • Use a standard potting soil that drains well and don’t disrupt the roots.
  • Make sure your container has a hole in the bottom that allows water to drain freely. Otherwise, it may become stagnant during the winter, killing your plant.
  • Water thoroughly after transplanting.

When Do I Need To Repot My Aeonium Urbicum?

Aeonium Urbicum is a slow-growing plant that does not require frequent repotting due to size growth. Because of the rising root growth, your plant may become root-bound after a few years. However, if you observe the plant becoming root-bound earlier than expected, you can repot it. Overgrown roots can be identified by some of them projecting in the drainage holes or above the substrate.

Spring is the optimum time to repot because it is when roots grow and the plant will become more established.

Is The Aeonium Urbicum Toxic?

Humans and animals can be poisoned by Aeonium urbicum.

Always use gloves when handling this succulent, and keep children and dogs away from aeonium urbicum plants.

The succulent plant Aeonium urbicum is a fantastic addition to any yard or house. The Saucer Plant is a fantastic plant for beginners. They are simple to maintain and propagate, so anybody can have one!

What Is Aeonium Urbicum?

The saucer plant (aeonium urbicum) is a giant succulent with a vast rosette of smooth green obovate leaves and massive conical flowers. The gorgeous lime green rosette measures up to 20″ (50 cm) across. When grown in full sun, the tips of the spoon-shaped leaves become a rich red color.

The Aeonium urbicum (also known as Sempervivum urbicum) is the largest of the aeonium plants. The saucer plant succulent can grow up to 6 feet (1.8 meters) tall and has numerous rosettes.

The huge blossoms of the aeonium urbicum (saucer plant) are another intriguing feature. These tiny white or pink flower clusters can reach heights of 3 feet (1 meter).

Is Aeonium Urbicum Rare?

Tenerife is home to the succulent plant aeonium urbicum. It is an extremely unusual succulent that is rarely found in the wild.

You may have heard the aeonium urbicum plant referred to as the saucer plant because of its thick brilliant lime leaves that grow in a flat flower arrangement that resembles a flying saucer.

The saucer plant is bright green for most of the year, but it can occasionally turn deep red at the tip of its leaves. This happens when the plant is stressed.

Similar Posts